RTO1500KR2 2 ways RMS dismountable current transmiter

Product catalog summary

Overview: The RTO1500KR2 series is a 2-way RMS dismountable Hall Effect current transmitter designed by Rongtech Industry (Shanghai) Inc. It is an open-loop device that provides galvanic isolation between primary and secondary circuits, capable of measuring DC, AC pulse, and various irregular wave currents.

Electrical Specifications:

Rated Input (Ipn): 400A to 1500A depending on the model.
Measurement Range (Ip): 0 to 2000A.
Rated Output Current: 4 to 20 mA ±1%.
Supply Voltage: 20 to 30 VDC.
Linearity: ≤0.5% FS.
Zero Current Output: +4 ±0.1 mA.
Offset Drift: ≤±0.005 mA/°C.
Response Time: ≤200 ms.
Bandwidth: DC to 6000 Hz.
Galvanic Isolation: 5.0 kV at 50 Hz, AC, 1 min.

Applications: Suitable for variable speed drives, uninterruptible power supplies (UPS), wave choppers, battery-supplied applications, welding machine power, and telecommunication power.

Standards: Complies with UL94-V0, EN60947-1:2004, IEC60950-1:2001, EN50178:1998, and SJ 20790-2000.

General Data:

Operating Temperature: -40 to +85°C.
Storage Temperature: -40 to +125°C.
Mass: Approximately 319 g.

Mechanical Dimensions: All dimensions are in mm with a general tolerance of ±1mm.

Directions for Use:

Ensure correct wiring to avoid damage.
Output amplitude can be adjusted as per user requirements.
Custom designs available for different rated input and output currents.
The overflow hole can be disassembled for ease of use.

Characteristics Chart: Includes effects of impulse noise and output voltage connections.

Catalog excerpts

RTO1500KR2 2 ways RMS dismountable current transmiter-1

RTO1500KR2 series current sensor is 2 way rms dismountable, which is a open loop device based on the measuring principle of the hall effect , with a galvanic isolation between primary and secondary circuit . It can measure DC, AC pulse and various irregular wave current in electrical isolation conditions.

Open the catalog to page 1

RTO1500KR2 2 ways RMS dismountable current transmiter-2

Rongtech Industry (ShangHai) Inc., RTO1500KR2 Series 2 Way RMS Dismountable Hall Effect Current Transmitter Mechanical dimension(for reference only) 1.When the current will be measured goes through a transmitter, the current will be measured at the output end. (Note: The false wiring may result in the damage of the transmitter). 2. The output amplitude of the transmitter can be adjusted according to users' requirements. 3.Custom design in the different rated input current and the output current available. 4.When installing, the overflow hole can be disassembled, it's easy to use. Effects of impulse...

Open the catalog to page 2