Rongtech Industry (ShangHai) Inc., RTNT1000-C3 High Precision Closed Loop Mode Hall Effect Current Sensor The RTNT1000-C3 current sensor is a closed loop device based on the measuring principle of the hall effect and null balance method ,with a galvanic isolation between primary and secondary circuit, the size of primary not affect test precision, no matter the location of primary in the hole of current sensor, It can really measure resolution 1000:1 and it uses for precision measurement of DC, AC and pulse current. Electrical data(Ta=25℃±5℃) Type RTNT1000-C3 Unit Parameter Rated input Ipn) Measure range(Ip) coil resister Measure resister Turns ratio(Np/Ns) Rated output (Isn) Supply voltage Zero offset Offset drift Response time Galvanic isolation di/dt accurately followed Power consumption 1.AC variable speed drives and servo motor drives 3.attery supplied applications 5.witched Mode Power Supplies (SMPS) 2.Static converters for DC motor drives 4.Uninterruptible Power Supplies (U

Rongtech Industry (ShangHai) Inc., RTNT1000-C3 High Precision Closed Loop Mode Hall Effect Current Sensor Mechanical dimension(for reference only) Bottom view Connection Connector -Vc No connection Back view Remarks：1. All dimensions are in mm. 2. General tolerance ±1mm. Directions for use 1.Is will be in a forward direction when the Ip flows according to the direction of the arrowhead. 2.The primary conductor should be≤120℃. 3.The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar. Standards  General date Value -40～+85 Operating...