*mydirectindustry

RTLT1000SH current sensor
1 /2Pages

Catalog excerpts

Rongtech The RTLT1000SH Mode current sensor is a closed loop device based on the measuring principle of the hall effect and null balance method ,with a galvanic isolation between primary and secondary circuit, the size of primary not affect test precision, no matter the location of primary in the hole of current sensor, It can really measure resolution 1000:1 and it uses for precision measurement of DC, AC and pulse current || Electrical data(Ta=25°C+ 5 C)

Open the catalog to page 1

Rongtech Industry (ShangHai) Inc., RTLT1000SH Mode High Precision Closed Loop Mode Hall Effect Current Sensor Mechanical dimension(for reference only) Remarks：1. All dimensions are in mm. 2. General tolerance ±1.0mm Directions for use 1.Is will be in a forward direction when the Ip flows according to the direction of the arrowhead. 2.The primary conductor should be≤120℃. 3.The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar. 4.The primary turns should be at the top of the sensor for the best magnetic coupling. 5.When the current...

Open the catalog to page 2