RTC50HXS5 close loop current sensor

Product catalog summary

Overview: The RTC50HXS5 series is a multi-range closed loop Hall Effect current sensor designed by Rongtech Industry (Shanghai) Inc. It provides accurate electronic measurement of DC, AC, or pulsed currents with galvanic isolation between primary and secondary circuits.

Electrical Specifications: The sensor operates at a supply voltage of +5V with a power consumption of 15+Ip/Ns mA. It features a rated output voltage of 0.625±0.5% V and a reference voltage of +2.5±0.4% V. The sensor maintains linearity at ≤0.1 %FS and has a response time of ≤500 nS. It can accurately follow di/dt changes greater than 50 A/µS and operates within a bandwidth of DC to 100 kHz.

Applications: The sensor is suitable for variable speed drives, welding machines, battery-supplied applications, uninterruptible power supplies (UPS), and electrochemical applications.

Standards: The product complies with UL94-V0, EN60947-1:2004, IEC60950-1:2001, and EN50178:1998 standards, with a test voltage of 1000V.

General Data: The operating temperature range is -40 to +105 ºC, and the storage temperature range is -40 to +125 ºC. The sensor has an approximate mass of 7 g.

Mechanical Dimensions: Dimensions are provided for reference with a general tolerance of ±1mm.

Pin Connections: The sensor offers different configurations for primary rated current and output voltage, with specific primary impedance and inductance values.

Directions for Use: It is crucial to ensure correct wiring to avoid sensor damage. Custom designs are available for different rated input currents and output voltages.

Characteristics Charts: The document includes charts illustrating pulse current signal response characteristics, effects of impulse noise, and input current-output voltage characteristics.

Catalog excerpts

Rongtech ® RTC50HXS5 series multi-range current sensor is a closed loop device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit, it provides accurate electronic measurement of DC, AC or pulsed currents.

Open the catalog to page 1

Rongtech Industry(ShangHai) Inc., RTC50HXS5 Series Multi-range Closed Loop Mode Hall Effect Current Sensor Mechanical dimension(for reference only) marks: 1. All dimensions are in mm. 2. General tolerance ±1mm 1.When the current will be measured goes through a sensor ,the voltage will be measured at the output end. (Note: The false wiring may result in the damage of the sensor). 2. Custom design in the different rated input current and the output voltage available. || Characteristics chart || Effects of impulse noise Pulse current signal response characteristic Input current-output voltage characteristic...

Open the catalog to page 2