RTC300DSH digital current sensor
1 /2Pages

Catalog excerpts

RTC300DSH series current sensor is a closed loop device based on the measuring principle of the hall effect and null balance method, with a galvanic isolation between primary and secondary circuit, the size of primary doesn't affect test precision, no matter the location of primary in the hole of current sensor. It can really measure resolution 1000:1, it uses for precision measurement of DC, AC and pulse current. || Electrical data (Ta=25 °C+ 5 C) = 1.AC variable speed drives and servo motor drives 2. Static converters for DC motor drives 3.Battery supplied applications ^Uninterruptible Power Supplies (UPS) 5. Switched Mode Power Supplies (SMPS) 6.Power supplies for welding applications.

Open the catalog to page 1

|| Mechanical dimension(for reference only) 1. All dimensions are in mm. ;2. General tolerance ±1.0mm || Directions for use 1.Is will be in a forward direction when the Ip flows according to the direction of the arrowhead. 2.The primary conductor should be^120°C. 3.The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar. 4.The primary turns should be at the top of the sensor for the best magnetic coupling. 5. When measure current flows according to the direction of the arrowhead, Output terminal gets the same phase current 6.When...

Open the catalog to page 2