Tormax Series ES-40 Series
8Pages

Tormax Series ES-40 Series

Tormax Series. Engine lathes for tool room, production, maintenance and training Tormax Series engine lathes are versatile and accurate. They provide multiple speed and feed combinations to meet the most diverse machining requirements. Equipped with 4-jaw independent chuck (optional) Equipped with 4-jaw independent chuck (optional) Equipped with 4-jaw independent chuck (optional)

The bed, double wall, construction is internally ribbed and provides excellent rigidity. Guide ways are hardened and ground with hardness above 450 Brinell. Hardened and ground gears and shafts, are dynamically balanced and run in an oil bath. The wide range of speeds and the large number of speeds enables the selection of optimum metal cutting conditions. The rigid cast housing together with the excellent transmission system ensure high performance and a long working life. Thread and feed gearbox Provides multiple feed and thread pitch combinations. Gears and shafts are hardened, run in...

ES-40 Series. Engine lathes for tool room, production and maintenance ES-40 Series lathes are robust and versatile with high power and torque. They provide the power and exibility to machine many part congurations. Equipped with 4-jaw independent chuck and steady rest (optional). Headstock Gears and shafts are hardened, ground and dynamically balanced. Pressure lubrication is used to minimize wear. The rigid housing together with the efcient transmission system provides excellent performance without vibration and noise. The wide range of speeds and the large number of speeds enables the...

Engine lathe - Tormax 20/20A Standard equipment • 8 - position square tool post mounted on a rotating base • Manual pump for bed and cross slide guideway lubrication • Chip pan • Chuck guard • Control electric switch and safety system incorporated in the apron • Electrical system for 220V 60Hz • Foot operated single disc brake coupled to main motor • Reduction sleeve for main spindle with MT-3 x 60º center • Safety micro-switch in end gearing door • Set of instruction manuals • Set of leveling screws and nuts • Set of wrenches for machine operation • Spindle nose ASA L0 with Ø 40 mm through...

(A) Tormax 20, 30 with 0 5 / 1 0 / 1 5 m between centers and Tormax 30A with 1 0 m between centers are not provided with gap Tormax 30B with 2 25 and 3 25 m between centers are provided with gap as standard equipment Tormax 30A with 1 5 and 2 25 m between centers and Tormax 30B with 1 5 m between centers may be supplied with gap as optional equipment upon request Tormax 35, Tormax 35B and ES-40 are not provided with gap Tormax 35A with 1 5 and 2 m between centers are provided with gap as standard equipment ES-40A / ES-40B as an option and at extra cost may be provided with a gap bed and...

(B) (ES-40 / ES-40A) As an option and at extra cost may be provided with: Spindle with 0 104 mm hole, Cam Lock D1-11 nose, spindle diameter at front bearing 140 mm and 18 speeds from 22.4 to 1,180 rpm. (C) (ES-40 / ES-40A) When equipped with four-way rapid traverse apron, longitudinal feeds are from 0 049 to 8 874 mm / rot and cross feeds from 0 017 to 3 005 mm/rot (D) Optional at extra cost.

Romi Machine Tools, Ltd. 1845 Airport Exchange Blvd Erlanger KY 41018 EUA Phone +1 (859) 647 7566 Fax +1 (859) 647 9122 sales@romiusa.com www.romiusa.com Romi Europa GmbH Wasserweg 19 D 64521 Gross Gerau Germany Phone +49 (6152) 8055 0 Fax +49 (6152) 8055 50 sales@romi-europa.de Tormax and ES-40 Series / IN / AA - Technical specications subject to change without notice. – Printed in Brazil – Please, recycle. Indústrias Romi SA Av Pérola Byington 56 Santa Bárbara d’Oeste SP 13453 900 Brazil Phone +55 (19) 3455 9000 Fax +55 (19) 3455 2499 maqfer@romi.com.br www.romi.com.br