Catalog Engine Lathes ROMI ES Series
8Pages

ROMI ES-40 | ROMI ES-40A | ROMI ES-40B ENGINE LATHES

ROMI: Since 1930 producing high technology. Since its foundation, the company is recognized by its focus on creating products and innovative solutions which guarantees its technological leadership among big manufacturers of machine tools market. ROMI industrial complex is among the most modern and productive ones in the segments of machine tools, plastic processing machines and cast iron parts of high quality. Continuous investments in Research & Development result in products with state-of-the-art technology. The high technology applied to Romi machines offer highly reliable products, with...

Engine lathes for tool room production and maintenance ES Series engine lathes are versatile and accurate. They provide multiple speed and feed combinations, to meet the most diverse machining requirements.

ES-40 • Headstock: 18 speeds, max. 2,360 rpm • Spindle nose ASA LI, 0 65 mm (2.56") thru-hole • Main motor: 15 hp /11,2 kW ES-40A • Headstock: 18 speeds, max. 1,700 rpm • Spindle nose ASA LI, 0 65 mm (2.56") thru-hole • Main motor: 15 hp /11,2 kW ES-40B • Headstock: 18 speeds, max. 1,180 rpm • Spindle nose ASA LI, 0 65 mm (2.56") thru-hole • Main motor: 15 hp /11,2 kW Capacities 1,500 / 2,000 mm (59" / 79") - distance between ends] “ *1 0 305 mm II 2'l - admissible 2,000 / 3,000 mm (79" /118") - distance between ends 0 450 mm 117.7") - admissible on transverse carriage

Bed The bed, double wall, construction is internally ribbed ans provides excellent rigidity. Guide ways are hardened and ground with hardness above 450 Brinell. Headstock Hardened and ground gears and shafts, are dinamically balanced and run in an oil bath. The rigid cast housing together with the excellent transmission system ensure high performance and a long working life. Guide spindle protection system and feed shaft It offers protection and safety, not allowing operator contact with the guide spindle and feet shaft, thus avoiding the possibility of accidents. Structurally rigid, the...

End gearing All gears all made of steel. There is no gear change required for conversion from Metric to Inch threads or from Module to Diametral Pitch threads. Gear change is required only for conversion from Metric and Inch threads to Module and Diametral Pitch threads. Automatic disengagement Enables accurate repeatability of up to 4 linear measurements, decreasing cycle times for the production of multiple parts. ES-40 / ES-40A models also incorporate an adjustable singleposition cross automatic disengagement. Thread and feed gearbox Provides multiple feed and thread pitch combinations....

Technical Specifications Capacity Centers height Distance between centers Swing over bed Swing over saddle wings Swing over cross slide Swing through gap Length of gap in front of chuck Cross slide travel Tool post carriage travel Tool section Bed Width Height Headstock Spindle nose Spindle hole diameter Spindle taper hole degrees Reduction sleeve taper hole Spindle diameter at front bearing Number of speeds Speed ranges Tailstock Quill travel Quill diameter Quill taper Gearbox threads and feeds Longitudinal feeds Cross feeds Inch threads Metric threads Module threads Diametral Pitch...

ROMI - ITALY ROMI - GERMANY ROMI-UK-O ROMI - FRANCE ROMI - BRAZIL Borkhardt+Weber Fertigungssysteme GmbH Burkhardt+Weber-Strasse 57 72760 Reutlingen, Germany Phone+49 7121 315-0 info@borkhardt-weber.de www.borkhardt-weber.de ROMI Machine Tools, Ltd 1845 Airport Exchange Blvd Erlanger KY - 41018 USA Phone+1 (859)647 7586 sales@romiosa.com www.romiosa.com ROMI Europa GmbH Wasserweg 19 D 64521 Gross Gerau Germany Phone+49 (6152) 8055 0 sales@romi-eoropa.de www.romi-eoropa.de ROMI France SAS Parc de Geneve, 240 Rue Ferdinand Perrier 69800 ST Priest Phone+33 4 37 25 60...