coMponents for Material handling_2024

Product catalog summary

Separator Systems
The document describes two types of separator systems, Type A and Type B, used in dynamic storage systems for material handling. These systems are designed to manage the flow and separation of materials on conveyor systems.

Type 80 Brake Rollers

Applications: Suitable for use with load conveying rollers of any diameter, with a required overhang of about 2 mm on the conveyor roller bed. The support structure of the brake roller determines the minimum spacing of adjacent load rollers.
Characteristics: The rollers have a galvanized steel casing with a diameter of 80 mm and an internal braking system. Supports are made of steel plates and thermoplastic brackets supported by springs. The base weight is 1.645 kg, with a weight per mm of 0.00385 kg. The maximum unit load is 1,000 daN.
Operation: The rollers control the speed of packages on gravity lanes, maintaining a constant conveying speed. Deceleration is achieved through brake shoes that expand by centrifugal force, applying pressure proportional to the package speed. Rubber belts can be added to improve friction.
Usage Guidelines: The mounting distance depends on system type, package characteristics, lane incline, and environmental conditions. For controlled speed, it is recommended to position a roller for each pallet location, ensuring the speed does not exceed 0.3 m/sec. Proper installation should result in a package speed of 0.1 to 0.2 m/sec. The lane incline must allow packages to start moving from a stopped position. The device should not be used to stop packages to avoid system overload.

Brake Wheels
The document also mentions brake wheels, which are likely used in similar applications as the brake rollers, although specific details are not provided in the excerpt.

Catalog excerpts

coMponenti per Magazzini dinaMici coMponents for Material handling Dispositivo separatore Separator System Ruote deceleranti Brake wheels coMponents for Material handling coMponenti per Magazzini dinaMici Rulli deceleranti tipo 80 Type 80 brake rollers

Open the catalog to page 1

COMPONENTI PER MAGAZZINI DINAMICI COMPONENTS FOR MATERIAL HANDLING dispositivo separatore dispositivo separatore separator systeM separator systeM L = lunghezza del pallet + 75mm L = Pallet length + 75mm L = lunghezza del pallet + 50mm L = Pallet length + 50mm Dispositivo separatore tipo B Type B Separator system coMponents for Material handling coMponenti per Magazzini dinaMici Dispositivo separatore tipo A Type A Separator System

Open the catalog to page 2

COMPONENTI PER MAGAZZINI DINAMICI COMPONENTS FOR MATERIAL HANDLING rulli deceleranti tipo 80 type 80 brake rollers rulli deceleranti tipo 80 type 80 brake rollers Applicazioni: I rulli deceleranti sono utilizzabili con rulli portanti di qualsiasi diametro, e devono sporgere di circa 2 mm sul piano dei rulli di trasporto. L’ingombro del supporto del rullo decelerante determina il passo minimo dei rulli portanti contigui. Caratteristiche: · Mantello: in acciaio zincato diam. 80 mm, con dispositivo decelerante inserito all’interno; · Supporti: costituiti da piastra di acciaio e staffa in materiale...

Open the catalog to page 3

COMPONENTI PER MAGAZZINI DINAMICI COMPONENTS FOR MATERIAL HANDLING Rulli deceleranti tipo 80 150 63 type 80 brake rollers coMponents for Material handling coMponenti per Magazzini dinaMici Rullo decelerante Brake roller

Open the catalog to page 4

coMponents for Material handling_2024

coMponents for Material handling_2024

Catalog excerpts

All Roll-ven spa catalogs and technical brochures

Archived catalogs