*mydirectindustry

ROLEC technoPLUS

Product catalog summary

Overview: The document provides technical specifications for technoPLUS premium plastic enclosures made of LURAN®. These enclosures are designed for durability and aesthetic appeal, featuring integrated lid supports, optional mast attachments, and recesses for membrane keypads.

Specifications:

Material: ASA LURAN®, UV stabilized with a 2° mould slope for ejection.
Ingress Protection: IP 66 / EN 60529, with an optional upgrade to IP67.
Gasket: Silicone gasket operational between -50°C to +140°C, with an EMC gasket option for -55°C to +160°C.
Lid Screws: Made of stainless steel 1.4567 (V2A), captive.
Design Covers: Made of polypropylene (PP) in RAL 7016, anthracite grey.
Surface Finish: Powder coating in RAL 7035, light grey.

Features:

Integrated recess in the lid for membrane keypads or front plates.
Internal mounting with attachment webs and domes.
Optional mast attachment available in anthracite grey.

Range Overview: The document lists various models with specific dimensions and weights, such as TP 090, TP 092, TP 112, TP 132, and TP 172, each with unique length, width, height, and depth measurements.

Design Considerations: The document emphasizes the mould slope for moulding ejection and provides detailed dimensions for each model, highlighting the importance of precise measurements at the enclosure bottom.

Catalog excerpts

technoPLUS Premium plastic enclosures made of LURAN ®

Open the catalog to page 1

Technical data technoPLUS Integrated recess for membrane keypads Enclosure fastening with closed lid Design covers for the perfect look Mounting standoffs for self-tapping screws Optional mast attachment Enclosure: ASA LURAN®, UV stabilized: 2° mould slope for moulding ejection, internal measures diminishing circulatory towards enclosure bottom by 2°. Integrated recess: in the lid for membrane keypad or front plates Internal mounting: Attachment webs in the bottom section and attachment domes in the top section Ingress protection: IP 66 / EN 60529 Gasket: Silicone gasket (-50°C to +140°C), Lid...

Open the catalog to page 2

Mounting dimensions

Open the catalog to page 3

ROLEC Attachment and mounting dimensions technoPLUS 130 * Please note: Mould slope for moulding ejection, dimensions in the amount ofin Höhe des Gehäusebodens! * Bitte beachten: Gehäusewand mit Entformungsschräge, Maßangaben the bottom! 120 150 162 * Please note: MouldGehäusewand mit Entformungsschräge, Maßangaben in Höhe des Gehäusebodens! * Bitte beachten: slope for moulding ejection, dimensions in the amount of the bottom!

Open the catalog to page 4

* Please note: Mould slope for moulding ejection, dimensions in the amount of the bottom! Please note: Mould slope for moulding ejection, dimensions in the amount of the bottom!

Open the catalog to page 5

ROLEC Attachment and mounting dimensions technoPLUS 270 210 240 252 * Please note: MouldGehäusewand mit Entformungsschräge, Maßangaben in Höhe des Gehäusebodens! * Bitte beachten: slope for moulding ejection, dimensions in the amount of the bottom!

Open the catalog to page 6

ROLEC technoPLUS

ROLEC technoPLUS

Catalog excerpts

All ROLEC Gehäuse-Systeme GmbH catalogs and technical brochures