*mydirectindustry

ROLEC aluNORM

Product catalog summary

Overview: The document outlines the specifications and options for aluNORM multi-variable enclosures made from die-cast aluminium, tailored for industrial applications with various sizes and configurations.

Specifications:

Material: Constructed from die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725).
Design: Features a 1° mould slope for casting ejection, with internal dimensions reducing by 1° towards the bottom.
Fastening: Utilizes space-saving single-channel technology with M4/M6 fastening threads in both upper and lower sections.
Ingress Protection: Rated at IP66 / EN 60529, with an optional upgrade to IP67 for enhanced protection.
Gasket Options: Includes TPE moulded gasket (silicone-free, -40°C to +120°C), Chloroprene (CR) Gasket (-30°C to +90°C), Silicone gasket (-50°C to +140°C), and EMC gasket (-55°C to +160°C).
Lid Screws: Made from stainless steel 1.4567 (V2A), captive.
Surface Finish: Powder-coated in RAL 7032, silky grey, with options for corrosion protection and special colours.

Variants and Options:

aluNORM AS: Comes with external and internal hinges, mounting rail and terminals, and mounting plates. External mounting brackets and feet are available for sizes AS 080 to AS 324.
aluNORM AF: Similar to AS, with additional options for external mounting brackets and feet for sizes AF 080 to AF 324.
aluNORM AD: Features cross rails and mounting rail and terminals, with external mounting options for sizes AD 080 to AD 324.
aluNORM AH: Includes mounting rail and terminals, with external mounting options for sizes AH 100 to AH 244.

Delivery Overview: A detailed list of available types, dimensions, and features for each variant, including material numbers and specific configurations, is provided.

Key Features:

High ingress protection suitable for harsh environments.
Multiple gasket options for different temperature ranges and applications.
Customizable surface finishes for enhanced durability and aesthetics.
Various mounting options to accommodate different installation requirements.

Catalog excerpts

aluNORM Multi-variable enclosures made of aluminium

Open the catalog to page 1

Technical data External mounting bracket AS 080 - AS 166 External mounting feet AS 200 - AS 324 External hinge Internal hinge Hold h Mounting plate Mounting rail and terminals Enclosure: Die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725). 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Fastening: Space-saving single-channel technology Components: Fastening thread M4/M6 in upper and lower section. Ingress protection: IP66 / EN 60529 Gasket: TPE moulded gasket, silicone-free (-40°C to +120°C) Chloroprene (CR) Gasket...

Open the catalog to page 2

Delivery overview aluNORM AS

Open the catalog to page 3

Technical data External mounting bracket AF 080 - AS 166 External mounting feet AF 200 - AS 324 External hinge Internal hinge Hold hinge Mounting plate Enclosure: Die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725). 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Fastening: Space-saving single-channel technology Components: Fastening thread M4/M6 in upper and lower section. Ingress protection: IP66 / EN 60529 Gasket: TPE moulded gasket, silicone-free (-40°C to +120°C) Chloroprene (CR) Gasket (-30°C to +90°C) Lid screws:...

Open the catalog to page 4

Technical data aluNORM AD External mounting bracket AD 080 - AD 166 External mounting feet AD 200 - AD 324 External hinge Internal hinge Hold hinge Mounting rail and terminals Mounting plate Cross rail Enclosure: Die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725). 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Fastening: Space-saving single-channel technology Components: Fastening thread M4/M6 in upper and lower section. Ingress protection: IP66 / EN 60529 Gasket: TPE moulded gasket, silicone-free (-40°C to +120°C)...

Open the catalog to page 6

Technical data aluNORM AH External mounting bracket AH 100 - AH 166 External mounting feet AH 200 - AH 244 External hinge Internal hinge Hold hinge Mounting rail and terminals Mounting plate Enclosure: Die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725). 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Fastening: Space-saving single-channel technology Components: Fastening thread M4/M6 in upper and lower section. Ingress protection: IP66 / EN 60529 Gasket: TPE moulded gasket, silicone-free (-40°C to +120°C) Chloroprene...

Open the catalog to page 8

Mounting dimensions

Open the catalog to page 9

ROLEC Attachment and mounting dimensions aluNORM AS 50 42.5 * 32.5 * Maximum number of cable glands per enclosure side * Pleasebeachten: Gehäusewand mit Entformungsschräge, Maßangabenbottom! des Gehäusebodens! * Bitte note: Mould slope for casting ejection, dimensions in the amount of the in Höhe * Pleasebeachten: Gehäusewand mit Entformungsschräge, Maßangabenbottom! des Gehäusebodens! * Bitte note: Mould slope for casting ejection, dimensions in the amount of the in Höhe * Pleasebeachten: Gehäusewand mit Entformungsschräge, amount of the bottom! des Gehäusebodens! * Bitte note: Mould slope for...

Open the catalog to page 10

Maximum number of cable glands per enclosure side Maximum number of cable glands per enclosure side * Please note: Mould slope for casting ejection, dimensions in the amount of the bottom! Maximum number of cable glands per enclosure side Maximum number of cable glands per enclosure side

Open the catalog to page 11

* Please note: Mould slope forcasting ejection, d Maximum number of cable glands per enclosure side

Open the catalog to page 12

nssE Our is enclosures. 240 100 ' Please note: Mould slope forcasting ejection, dimensions in the amount of the bottom! Maximum number of cable glands per enclosure side * Please note: Mould slope for casting ejection, dimension:; in the amount of the bottom! Maximum number of cable glands per enclosure side * Please note: Mould slope for casting ejection, dimensions in the amount of the bottom! Maximum number of cable glands per enclosure side Maximum number of cable glands per enclosure side

Open the catalog to page 13

* Please note: Mould slope for casting ejection, dimensions in the amount ofthe bottom! Maximum number of cable glands per enclosure side

Open the catalog to page 14

nssE Our is enclosures. 120 Maximum number of cable glands per enclosure side * Please note: Mould slope for casting ejection, dimensions in thee amount of the bottom! Maximum number of cable glands per enclosure side * Please note: Mould slope for casting ejection, dimensions in the amount ofthe bottom! Maximum number of cable glands per enclosure side 276 288 300 * Pleas e note: Mould slope for cast i ng ejection, dimensions in the amount of the bottom!

Open the catalog to page 15

ROLEC Attachment and mounting dimensions aluNORM AS/AF 480 463.5* 430* * Pleasebeachten: Gehäusewand mit Entformungsschräge, Maßangabenbottom! des Gehäusebodens! * Bitte note: Mould slope for casting ejection, dimensions in the amount of the in Höhe Maximum number of cable glands per enclosure side Maximum number of cable glands per enclosure side * Pleasebeachten: Gehäusewand mit Entformungsschräge, Maßangabenbottom! des Gehäusebodens! * Bitte note: Mould slope for casting ejection, dimensions in the amount of the in Höhe Maximum number of cable glands per enclosure side Bitte note: Mould slope...

Open the catalog to page 16

Maximum number of cable glands per enclosure side 100 100 54 Maximum number of cable glands per enclosure side Maximum number of cable glands per enclosure side 200 54 Maximum number of cable glands per enclosure side

Open the catalog to page 17

ROLEC Attachment and mounting dimensions aluNORM AF 120 105 * 76* Maximum number of cable glands per enclosure side * Please note: Mould Gehäusewand mit Entformungsschräge, Maßangaben in Höhe des Gehäusebodens! * Bitte beachten: slope for casting ejection, dimensions in the amount of the bottom! * Pleasebeachten: Gehäusewand mit Entformungsschräge, amount of the bottom! des Gehäusebodens! * Bitte note: Mould slope for casting ejection, dimensions in the Maßangaben in Höhe Maximum number of cable glands per enclosure side * Pleasebeachten: Gehäusewand mit Entformungsschräge, Maßangabenbottom!...

Open the catalog to page 18

All ROLEC Gehäuse-Systeme GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list