aluFACE
26Pages

aluFACE Command enclosures from cast aluminium

A front plate enclosure from aluminium - for every application ... aluFACE series KTE - secure connection technology in a separately opening connection space aluFACE series KCE - flat front framework, two-part top section The aluFACE series KVE - flat front framework, two-part top section, screwed aluFACE series KVF - flat front framework, flat lower section, screwed aluFACE - this ROLEC enclosure series has many faces. From aluminium. The front door comprises die-cast zinc corner pieces, which are mounted with extruded aluminium pressed profiles. Economy factor: The economical screwed...

aluFACE series KSE - high front framework, two-part top section aluFACE series KE - flat front framework, single-part aluminium frame "The principle of perfect alignment with the environment and the living space. Diversity of the species.“

Technical data aluFACE series KTE aluTWIN Mounting rail and terminals External mounting feet Mounting plates Enclosure with separate connection space and front frame: Die-cast aluminium: EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725) 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Lid surface: Powder coating, RAL 7040, window grey Fastening: Space-saving single-channel technology External mounting feet: Die-cast zinc (Zn Al 4 Cu 1) Installation option: Fastening thread M4/M6 Mounting plates: Sheet steel, galvanised Front...

□ Standard # Available O Not available Mounting dimensions

Technical data aluFACE series KCE External mounting brackets Handle system RAL 3020, traffic red Handle system RAL 9005, deep black Double-bit lock and hinge (on W side) Optional suspension system taraPLUS Enclosure with flat front frame: Die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725). 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Fastening: Space-saving single-channel technology Fastening: Support system taraPLUS Installation option: Fastening thread M6 External mounting brackets: Die-cast zinc (Zn Al 4...

Delivery overview aluFACE series KCE

Technical data____._________ Handle system RAL 9005, deep black Handle system RAL 3020, traffic red Front frame with enclosure upper section pivoting Double-bit lock and hinge (on W side) Optional suspension system taraPLUS Enclosure with high front frame: Die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725). 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Fastening: Space-saving single-channel technology Installation option: Fastening thread M6 Front frame: Corner pieces die-cast zinc, (Zn Al 4 Cu 1)...

□ Standard # Available O Not available Mounting dimensions

Technical data____._________ External mounting brackets Handle system RAL 3020, traffic red Handle system RAL 9005, deep black Optional suspension system taraPLUS Economical version with screwed front frame Enclosure with flat front frame: Die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725) .1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Fastening: Space-saving single-channel technology Installation option: Fastening thread M6 Front frame: Corner pieces die-cast zinc, (Zn Al 4 Cu 1) aluminium profile, (Al Mg Si...

Delivery overview aluFACE series KVE □ Standard # Available O Not available Mounting dimensions

Technical data aluFACE series KVF External mounting brackets Handle system RAL 3020, traffic red Handle system RAL 9005, deep black Economical version with screwed front frame Connection of the suspension system console versions on enclosure rear side Enclosure with flat front frame: Die-cast aluminium: EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725). 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1°. Enclosure bottom surface: Powder coating RAL 7035, light grey Fastening: Space-saving single-channel technology Fastening: Support...

Delivery overview aluFACE series KVF □ Standard # Available O Not available Mounting dimensions

Technical data aluFACE series KE ADI 180 External mounting brackets Handle system RAL 3020, traffic red Handle system RAL 9005, deep black Economical version with screwed front frame Optional suspension system taraPLUS Optionally available: Enclosure with front frame: Die-cast aluminium EN AN-44300 DIN EN 1706 (GD AL SI 12 / DIN 1725) 1° mould slope for casting ejection, internal measures diminishing circulatory towards enclosure bottom by 1° Fastening: Support system taraPLUS Fastening: Space-saving single-channel technology External mounting brackets: Die-cast zinc (Zn Al 4 Cu 1)...

□ Standard # Available O Not available Mounting dimensions

ROLEC Attachment and mounting dimensions aluFACE * Please note: Mould slope for casting ejection, dimensions in the Maßangabenbottom! des Gehäusebodens! * Bitte beachten: Gehäusewand mit Entformungsschräge, amount of the in Höhe * Please note: Mould slope for casting ejection, dimensions in the amount of the bottom! * Bitte beachten: Gehäusewand mit Entformungsschräge, Maßangaben in Höhe des Gehäusebodens! * Please note: Mould slope for casting ejection, dimensions in the amount of the bottom! * Bitte beachten: Gehäusewand mit Entformungsschräge, Maßangaben in Höhe des Gehäusebodens! *...

**Pleasebeachten: Gehäusewand mit Entformungsschräge, amount of the bottom! des Gehäusebodens! Bitte note: Mould slope for casting ejection, dimensions in the Maßangaben in Höhe * *Please beachten: Gehäusewand mit Entformungsschräge,amount of the bottom! des Gehäusebodens! Bitte note: Mould slope for casting ejection, dimensions in the Maßangaben in Höhe * Pleasebeachten: Gehäusewand mit Entformungsschräge, amount of the bottom! des Gehäusebodens! * Bitte note: Mould slope for casting ejection, dimensions in the Maßangabe