VersaCAMM VS-640i/540i/300i
2Pages

*Roland VersaWorks® is a 32-bit application, which runs on 64-bit Windows® with WoW64 (Windows 32-bit on OndS 540A/B [For VS-5401] ^X^ting with OndS 300A/B [ForVS-300i] white and metallic. Power requirements * 1 Note: The media holder of this machine is exclusive use for the media of paper tube (core) inner diameter 3 inches. To use 2 inches media, the optional media flanges are required. *2 The length of printing or cutting is subject to the limitations of the program. *3 'Media type: Media specified by Roland DG Corp. 'Temperature: 25°C (77°F), humidity: 50% 'Roll media must be loaded correctly. 'Applicable when all pinch rollers available to the media width are used. 'Side margins: 25 mm or more for both the left and right margins -Front margin: 35 mm or more -Excluding expansion/contraction of the media -Not assured when the print heater or dryer is used. -All correction or adjustment function of this machine has been made properly. *4 With Roland PET film, print travel: 1 m *5 [PREFEED] menu item must be set to "ENABLE.1 Range for assured repetition accuracy [64-inch model] -For media with a width exceeding 610 mm: Length 4,000 mm -For media with a width of 610 mm or less: Length 8,000 mm [54inch model] -For media with a width exceeding 610 mm: Length 4,000 mm 'For media with a width of 610 mm or less: Length 8,000 mm [30-inch model] 'Length 3,000 mm *6 'Provided that media length is under 3,000 mm -Excludes the effects of slanted movement and of expansion and contraction of me media. *7 Data size [64-inch model] 1,000 mm in the media-feed direction, 1,600 mm in the carriage-movement direction [54-inch model] 1,000 mm in the media-feed direction, 1,346 mm in the carriage-movement direction [30-inch model] 1,000 mm in the mediofeed direction, 736 mm in the carriage-movement direction -No lamination -Automatic detection of crop marks at 4 points when media is reloaded. -During cutting, [PREFEED] menu item must be set to "ENABLE." -Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media. *8 'Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment. 'Depending on the ambient temperature and media width, the preset temperature may fail lo be reached. Digital Value Engineering About Metallic Silver and White Inks Due to the nature of white and silver inks, the pigment in these inks will settle in the cartridge and ink flow system, requiring you to shake the cartridge before each use. Outdoor durability is three years for CMYK inks, one year for white ink, and one to three years for metallic silver ink, depending on the media used. Roland strongly recommends lamination for both indoor and outdoor graphics to ensure the quality of metallic inks. Roland DG products that feature this environmental label meet the company's criteria for environmental consciousness, a set of standards based on ISO 14021 self-declaration type II. For more information, please visit Roland reserves the right to make changes in specifications, materials or accessories without notice. Your actual output may vary. For optimum output quality, periodic maintenance to critical components may be required. Please contact your Roland dealer for details. No guarantee or warranty is implied other than expressly stated. Roland shall not be liable for any incidental or consequential damages, whether foreseeable or not, caused by defects in such products. Adobe, PostScript, PostScript 3 and the PostScript logo are trademarks of Adobe Systems Incorporated. PANTONE® is the property of Pantone LLC. All other trademarks are the property of their respective owners. Reproduction or use of copyrighted material is governed by local, national, and international laws. Customers are responsible for observing all applicable laws and are liable for any infringement. Roland DG Corp. has licensed the MMP technology from the TPL Group. AUTHORIZED DEALER:

BEYOND IMAGINATION Versatile performance that powers your imagination VersaCAMM, the most popular wide-format inkjet printer for sign and durable graphics users around the world, has been reborn with superior performance to meet the needs of sign and graphics professionals. The versatile VersaCAMM VS-i series features the new high-density ECO-SOL MAX 2 ink available in CMYKLcLm, white, metallic and Light Black, a range of usability enhancements to improve ease of use, world leading integrated contour cutting, and of course, exceptional print quality rivaling that of a high-end machine. Go...