DWX-51D
2Pages

{{requestButtons}}

Catalog excerpts

DWX-51D - 1

5-axis simultaneous milling Produce zirconia, wax, PMMA, composite resin, PEEK and gypsum restorations 10-station Automatic Tool Changer (ATC) for continuous production Includes 9 pin-type material adapter Precision ball screw-driven system New C-shape clamp for easy adjustment and alignment Powerful vacuum and anti-static ionizer for clean calibration and dust reduction Sturdy frame for stable milling Color-coded LED status lights signal machine errors and milling completion User-friendly tool storage, replacement and cleaning features Industry-best warranty and post-sale support Made in Japan Dental Mill SPECIFICATIONS Cuttable material Loadable workpiece shape Operating speed Spindle motor Spindle speed Rotary axis travel angle Number of burs housed Attachable bur Compatible compressed air Interface Control command set Power requirements Power consumption Operating noise External dimensions Weight Installation environment Included items System requirements for USB connection Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum Step section: 98.5 mm (diameter), height 10mm Body section: 95 mm (diameter), height max. 60mm Pin type Pin diameter: 6 mm 6 to 1800 mm/min. (0.24 to 70.9 in./min.) Brushless DC motor 6,000 to 30,000 rpm A: ± 360° B: ± 30° 10 Shank diameter: 4 mm, Length: 40 to 55 mm 0.02 to 0.2 MPa USB RML-1, NC code AC 100 to 240 V ±10%, 50/60 Hz , 2.0 A (overvoltage category II, IEC 60664-1) Approx. 200 W During operation: 70 dB (A) or less (when not cutting), During standby: 45 dB (A) or less Width x depth x height: 495 × 660 × 600 mm (19.5 × 26.0 × 23.6 in.) 67 kg (147.7 lbs.) Indoor use at altitudes up to 2,000 m (6,562 ft.) Temperature: 5 to 40 °C (41 to 104 °F), humidity: 35 to 80% (no condensation) Ambient pollution degree: 2 (as specied by IEC 60664-1) Short-term temporary overvoltage: 1440 V Long-term temporary overvoltage: 490 V Power cord, USB cable, Regulator, Air hose, Pin-type material adapter, Automatic correction jig, Detection pin, Torque screwdriver, Milling bur holders, Mounting screws, Hexagonal screwdriver, T-shaped hexagonal screwdriver, Dust-collection hoses, Dust collection hose adapter, spanner, Roland Software Package CD, Ferrite core, Manuals Windows® 7/8/8.1/10 (32 or 64 bit) operating system, plus included USB cable Disk type (with step) OPTIONS Milling bur holder Pin-type material adaptor Milling bur Milling bur Milling bur Milling bur Milling bur Milling bur The Roland Easy Shape logo symbolizes the Company’s philosophy in the dental industry. High-level products, rst quality materials, and sophisticated, cutting-edge technologies combine to create the nest dental milling devices and precision results for your lab. Replacement milling bur holder Replacement pin-type material adaptor R1.0mm milling bur for composite resin R0.5mm milling bur for composite resin R0.3mm milling bur for composite resin R1.0mm milling bur R0.5mm milling bur R0.4mm milling bur Roland DG reserves the right to make changes in specications, materials or accessories without notice. Actual device output may vary. For optimum output quality, periodic maintenance to critical components may be required. Please contact your Roland DG dealer for details. No guarantee or warranty is implied other than expressly stated. Roland DG shall not be liable for any incidental or consequential damages, whether foreseeable or not, caused by defects in such products. Three-dimensional shapes may be protected under copyright. All trademarks are the property of their respective owners. Reproduction or use of copyrighted material is governed by local, national, and international laws. Customers are responsible for observing all applicable laws and are liable for any infringement. Roland DG Corporation has licensed the MMP technology from the TPL Group. AUTHORIZED DEALER: The DWX-51D dental mill is designed with you in mind, delivering smart and eortless milling with the highest-quality results.

Open the catalog to page 1
DWX-51D - 2

DWXDWX-51D 5-Axis Dental Milling Machine The DWX-51D is designed for eortless, precision production of dental DWXprosthetics from copings, crowns and bridges to inlays, onlays and abutments, etc. With a host of automated features and a clean, stable DWX-51D is the perfect solution for labs wanting work environment, the DWXto increase production or those looking to get into digital milling for the rst time. Built-for-You and Built-to-Last It’s no accident that the DWX-51D has all the advanced and easy DWXfeatures that a lab technician is looking for in a production mill. After years of...

Open the catalog to page 2

All ROLAND catalogs and technical brochures

  1. Dimensor S

    2 Pages

  2. VC3-640/540

    2 Pages

  3. DWX-4W

    2 Pages

  4. LEF-300

    2 Pages

  5. xt-640

    2 Pages

  6. EGX-20

    2 Pages

  7. ECO-UV S

    2 Pages

  8. LEC-330

    2 Pages

  9. LEF-12

    2 Pages

  10. EGX-600/400

    2 Pages

  11. GX series

    2 Pages

  12. MPX - 90

    2 Pages

  13. FH - 740

    2 Pages

  14. FP - 740

    2 Pages

  15. RF-640

    2 Pages

  16. LEJ-640

    2 Pages

  17. LEC-540

    2 Pages

  18. LEC-300A

    2 Pages

  19. LEF-20

    2 Pages