Capable of milling glass ceramics and composite resin Combines 4-axis milling with simple one-button operation High-performance Jaeger DentaDrive spindle Multi pin-clamp to mill up to three dierent pin-type materials continuously 4-station Automatic Tool Changer to change grinding burs for continuous production Color-coded LED status lights signal machine errors and milling completion Easy VPanel operation to congure settings and track milling progress Connect up to four DWX devices to one computer Fully integrated pump and coolant system Automatic machine calibration Pair the DWX-51D and DWX-4W for the most exible and productive dry and wet solution Made in Japan SPECIFICATIONS Cuttable material Loadable workpiece shape Width Depth Height Operating speed Spindle Spindle speed Rotary axis travel angle A axis Number of burs housed Attachable bur Shank diameter Compatible compressed air* Interface Control command set Power requirements Power consumption During operation Operating noise During standby External dimensions Width x Depth x Height Weight Indoor use, Altitude Temperature Relative humidity Installation environment Ambient pollution degree Short-term temporary overvoltage Long-term temporary overvoltage Included items Operating system System requirements for USB connection USB cable OPTIONS Collet (model #ZC-3JD) Additive (model #ZAW-1000D) Filter for coolant tank (model #ZF-CLD) Grinding bur (model #ZGB-125D) Grinding bur (model #ZGB-50D) Grinding bur (model #ZGB-25D) Glass ceramics, Composite resin Maximum 40 mm (1.57 in) Maximum 20 mm (0.79 in) Maximum 20 mm (0.79 in) 6 to 1,800 mm/min. (0.24 to 70.9 in./min.) Jaeger high frequency spindle with taper cleaning function 15,000 to 60,000 rpm ± 360° 4 3 mm (Dedicated milling bur for wet grinding) 0.6 to 0.8 MPa USB RML-1, NC code AC 100 to 240 V +-10 %, 50/60 Hz , 1.9 A (overvoltage category II, IEC 60664-1) Approx. 200 W 70 dB (A) or less (when not cutting) 48 dB (A) or less 480 x 538 x 599 mm (18.9 x 21.2 x 23.6 in.) 53 kg (116.8 lbs.) Up to 2,000 m (6,562 ft.) 5 to 28°C (41 to 82.4°F) 35 to 80 % (no condensation) 2 (as specied by IEC 60664-1) 1,440 V 490 V Power cord, USB cable, Drain hoses, Detection pin, Dedicated milling burs, Automaticcorrection jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, Mounting screws, Setup guide, Daily maintenance card, Roland Software Package CD, Spindle maintenance kit Windows® 7/8/8.1/10 (32 or 64 bit) Use the included USB cable Replacement spindle collet Additive for coolant 1000 ml Replacement lter for coolant tank R1.25mm milling bur for wet grinding R0.50mm milling bur for wet grinding R0.25mm milling bur for wet grinding * Please contact your Roland DG dealer for the appropriate air compressor. The Roland Easy Shape logo symbolizes the Company’s philosophy in the dental industry. High-level products, rst quality materials, and sophisticated, cutting-edge technologies combine to create the nest dental milling devices and precision results for your lab. Roland DG reserves the right to make changes in specications, materials or accessories without notice. Actual device output may vary. For optimum output quality, periodic maintenance to critical components may be required. Please contact your Roland DG dealer for details. No guarantee or warranty is implied other than expressly stated. Roland DG shall not be liable for any incidental or consequential damages, whether foreseeable or not, caused by defects in such products. Three-dimensional shapes may be protected under copyright. Reproduction or use of copyrighted material is governed by local, national, and international laws. Customers are responsible for observing all applicable laws and are liable for any infringement. All trademarks are the property of their respective owners. Roland DG Corporation has licensed the MMP technology from the TPL Group. AUTHORIZED DEALER: Complete your dental restoration solution with the DWX-4W Wet Dental Mill.

DWX-4W Wet Dental Mill The DWX-4W represents the latest in DWX technology, going beyond dry milling to quickly and easily wet mill popular glass ceramics and composite resin with the precision and reliability Roland DG products are known for. Compact and easy-to-use, it provides unattended wet milling of crowns, bridges, inlays, onlays and veneers. User-Friendly Operation Even novice users can quickly set up the DWX-4W and begin creating prosthetics the same day the machine arrives. Ease of use features include: High-Performance Jaeger DentaDrive Spindle The DWX-4W’s high-performance 60,000 RPM...