sensor technology SIS VISION THE MAGIC EYES IN STEEL CORD INSPECTION • Non-destructive online monitoring of wire distance and wire position in the steel cord at full production speed. • New high resolution sensor technology enables process-reliable quality monitoring incl. live EPDM / EPI display. • Easy integration into breaker lines with the angle adjustable sensor bracket - ACU. ~| [Recipe loaded ~~ [System ready Defect occurred

SIS VISION ● Online quality monitoring of wire distance and wire position in steel cord at full production speed, at body ply and breaker material ● New high resolution sensor technology enables a live EPDM / EPI display ● Easy integration into new and existing production lines ● For LTR, TBR, PCR und OTR The SIS VISION system consists of sensors, corresponding hardware and software and a touch control panel. Due to the variable number of sensors, the customer-specific material width can be optimal covered and reliably monitored at full production speed. The new technology evaluates the wire...

THE MAGIC EYES IN STEEL CORD INSPECTION Reliable detection of material faults in steel cord: open splice or missing wire (left) double or narrow wires (middle) and local defects, such as crossed, loose or jumped wires (right). As key-turn-solution for breaker liners (steel cord with angled wires), ROLAND ELECTRONIC provides the angle adjustable sensor bracket ACU. See separate datasheet “SIS-VISION-ACU“ With the ACU it is possible to integrate the SIS VISION system into breaker lines. Depending on material type, angle settings are stored in the respective recipes. By selecting the recipe via...

Technical Data Angle Control - ACU see separate datasheet "SIS-VISION-ACU" Customized sensor drawer with sensor bracket, for the installation of the sensors or the sensors with angle control unit (ACU). Revision 1.31, September 2024 - Subject to technical modification and error ROLAND ELECTRONIC GmbH 75210 Keltem / Germany fax: +49 7236 9392-33 www.roland-electronic.com