Catalogs >
ROLAND ELECTRONIC >
OSI40 - Optical Surface Inspection

OSI40 - Optical Surface Inspection
4Pages

Catalog excerpts

ROLAND ELECTRONIC THE ROLAND PLUS ► Compact design ► Full HD graphics resolution V_/ Optical Surface Inspection OSI40 System for Surface Inspection and Fault Detection Laser based function principle • For Weld Seam Geometry Inspection, Pore Inspection, Crater and Crack Testing • Operating computer for TIVIS® • For the connection of EHR® AluCheck components • For the connection of standard laser triangulation sensors • Fieldbus interface • Interface for 1 axis drive

Open the catalog to page 1

OPTICAL SURFACE INSPECTION OSI40 The System OSI40 was designed for Surface Inspection and Fault Detection with 3D-Laser sensors and EHR® AluCheck 2D/3D Sensors. Optionally sensors from Keyence can be also used. Suitable applications are Weld Seam Inspection, Geometry Inspection, Pore Inspection, Crater and Crack Testing. The system consists of the operation computer equipped with the proven TIVIS® software and the proper sensor system. In addition, the system is able to control a linear axis of Nanotec type. This leads to a cost- effective mechanization of the measurement procedure. The...

Open the catalog to page 2

Typical faults of the weld seam geometry Kemo Naht Fehlende Randblidung Missing contour Lage Schwei&nahl VYurzeig arch hang Wald penetration Weld angle Root sagging Root concavity Weld Concavity Technical Data Connections: - Network interface 1: 10/100/1000 MBit/s Ethernet for data exchange with measuring controller - Network interface 1: 10/100/1000 MBit/s Ethernet free - 2x PCIe-Slots - 2x USB 2.0, 2x USB 3.0 - 1x RS232 Weight: approx. 23 kg (fan), approx. 25 kg (peltier cooler) Protection class enclosure: IP 54 (fan) IP 55 (peltier cooler) Dimensions in mm (W x H x D): 620 x 380 x 220...

Open the catalog to page 3

OPTICAL SURFACE INSPECTION OSI40Order Data:Ordering key: CPU + operating system Sensor connection Extra equipment EHR® AluCheck sensors and TIVIS® software are products of EHR® GmbH & Co. KG Otto-Maurer-Strasse 17 75210 Keltem / GermanyPhone: +49(0)7236-9392-0 Fax: +49(0)7236-9392-33 info@roland-electronic.com www.roland-electronic.com Revision 1.3, June 2017 - Subject to technical modification and error.

Open the catalog to page 4

OSI40 - Optical Surface Inspection 4Pages

Catalog excerpts

All ROLAND ELECTRONIC catalogs and technical brochures

OSI40 - Optical Surface Inspection
4Pages