*mydirectindustry

I10KV BLISTER

Product catalog summary

Overview: The I10KV Blister system is designed for non-contacting verification of blister strips in sealed packages using the inductive eddy current principle. It can handle up to 10 aluminum foil blister strips per package and is programmable for 255 different package sizes.

Specifications:

Maximum package height: 100mm (4in.)
Minimum blister size: 30x60mm (1.2 x 2.4in.)
Conveyor speed: Up to 90 m/min (270ft/min), processing 600 to 1000 packages per minute
Data communication: Opto-coupled RS232 interface

Functionality: The system uses a transmitter and receiver to create an alternating magnetic field. As packages pass through this field, eddy currents are generated by the aluminum foil, altering the magnetic field. These changes are detected and analyzed to verify package content. Parameters for each package type are set through a Teach-In procedure and stored in the control unit.

Teach-In Procedure: Up to 255 product parameter sets can be stored. The system requires a warm-up period of 30 minutes before teaching. Thresholds for underfill and overfill are calculated and optimized using sample packages.

Technical Data:

Operating voltage: 24VDC ± 4V
Power consumption: < 17W
Protection class: Enclosure IP65, Sensor IP54
Ambient temperature: 0 - 50°C (32 - 122°F)
Weight: Enclosure approx. 1.6kg (3.5lbs), Sensor approx. 1.0kg (3.0lbs)
Signal outputs: 4 Optocoupler unconnected
Signal inputs: 12 potential-free control inputs 24 VDC

Order Information: The system includes the I10KV/C-O Blister Package Comparator with optocoupler output and RS232 Interface, and the S/E B100 and S/E B100-60 eddy current sensors for blister packages.

Catalog excerpts

NON-CONTACTING TESTING ROLANDS sensor technology NON-CONTACTING BLISTER VERIFICATION • Inductive Eddy Current principle - Non-contacting verification of blister strips in sealed packages • Up to 10 aluminum foil blister strips in a package, programmable for 255 different package sizes • Max. package height 100mm (4in.), min. blister size 30x60mm (1.2 x 2.4in.) • High conveyor speed of up to 90 m/min (270ft/min), equals 600 to 1000 packages per minute • Data communication via opto coupled RS232 interface

Open the catalog to page 1

During ﬁlling tablet packs with blister strips automatically, underﬁlling or overﬁlling may occur. A content check is therefore absolutely necessary. In contrast to the customarily used check weighers the eddy current sensor system is based on a measuring principle which is free of inertia. This results in very high inspection velocities with only minimal space requirements of about 100 mm within the transportation line. For the correct veriﬁcation procedure it is necessary that the blisters - made partially or fully of aluminum foil - are stacked properly inside the sealed package. The sealed...

Open the catalog to page 2

NON-CONTACTING BLISTER VERIFICATION Dimensions of control unit I10KV / CO ROLAND ELECTRONIC Made in Germany Gerät Nr. Dimensions of receiver B100-60 Flange plug M16x1 (8 pole) Flange socket M16x1 (5 pole) Clearance for plug connection Clearance for plug connection

Open the catalog to page 3

Dimensions Receiver B100 / Transmitter B100-60 and B100 ROLAND ELECTRONIC GmbH

Open the catalog to page 4

All ROLAND ELECTRONIC catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list