Angle Control Unit SIS-ACU

Product catalog summary

Overview: The document describes the SIS VISION ACU, a key-turn solution for integrating a Steel Cord Inspection system into breaker lines. It features an angle adjustable sensor bracket that can be set between 15° and 75°.

Specifications: The system supports steel cord widths from 50 mm to 600 mm, with belt thickness ranging from 1.0 mm to 10 mm. Wire diameters can range from 0.6 mm to 8.0 mm, and the wire angle is adjustable between 15° and 75°. The system can operate at transport velocities from 2.0 m/min to 100 m/min, depending on resolution.

Components: The system includes the SIS-VISION-ACU-BASE for software and hardware extension, SIS-VISION-ACU-DEVICE for motor-driven sensor brackets, and SIS-VISION-SENSOR-120-X sensors. Optional components include a customized sensor drawer.

Technical Data: The system operates at 100-240 VAC with a power consumption of less than 480 W. It has a protection class of IP 65 and can function in ambient temperatures from 0°C to 50°C with a maximum relative humidity of 95%.

Installation and Configuration: The system is configured and set up via SIS VISION, with angle settings stored in recipes that can be selected via PLC or operator. The modern fieldbus interface allows data exchange with higher-level PLCs and supports Industry 4.0 standards for quality logging and storage.

Dimensions: The ACU dimensions are provided in millimeters, with detailed measurements for the SIS-ACU-BASE and other components.

Catalog excerpts

STEEL CORD INSPECTION SIS VISION ACU ANGLE ADJUSTABLE SENSOR BRACKET ● Key-turn solution, easy integration of the Steel Cord Inspection system into breaker lines ● Wide range adjustable from 15° to 7

Open the catalog to page 1

SIS VISION ACU ● New high resolution sensor technology enables a live EPDM / EPI display ● Fully automatic adjustable sensor bracket ● Key-turn solution ● Configuration and setup via SIS VISION As key-turn-solution for breaker liners (steel cord with angled wires), ROLAND ELECTRONIC provides the angle adjustable sensor bracket ACU. With the ACU it is possible to integrate the SIS VISION system into breaker lines. Depending on material type, angle settings are stored in the respective recipes. By selecting the recipe via PLC or operator, the sensors are automatically aligned to the desired angle....

Open the catalog to page 2

ANGLE ADJUSTABLE SENSOR BRACKET Fig: Dimensions of SIS-ACU-BASE. All dimensions in mm.

Open the catalog to page 3

Sensor for the „SIS VISION" system with 2x30 mm sensitive area (type of sensor depends on the customer's material specification or the corresponding application tests) Sensor drawer - optional Customized sensor drawer with sensor bracket, for the installation of the sensors or the sensors with angle control unit (ACU). Revision 1.4, July 2024 - Subject to technical modification and error

Open the catalog to page 4

Angle Control Unit SIS-ACU

Angle Control Unit SIS-ACU

Catalog excerpts

All ROLAND ELECTRONIC catalogs and technical brochures