- Catalogs
- Rohrback Cosasco Systems
- LINEAR POLARIZATION RESISTANCE (LPR) PORTABLE INSTRUMENT
LINEAR POLARIZATION RESISTANCE (LPR) PORTABLE INSTRUMENT
LINEAR POLARIZATION RESISTANCE (LPR) PORTABLE INSTRUMENT
- Portable corrosion rate monitoring.
- Imbalance (pitting) measurement.
- Solution resistance compensation for low conductivity environments.
- Temperature measurement capability.
- Compliant with EU Product Directions 89/336/EEC.
- Corrosion Rate Ranges: Autoranging from 0.01 to 200 mils per year (mpy), or equivalent in mm and µm.
- Imbalance Ranges: 0.01 to 100 pitting units or 0.025 to 250 µA.
- Temperature Measurement: Range from 0 º to +260 ºC with an accuracy of ±2 ºC and resolution of 0.1 ºC.
- Conductivity Range: 50 to 2,000 μmhos/cm with ±10% accuracy.
- Probe Compatibility: Compatible with 2 or 3 electrode LPR probes and 2 electrode LPR Temperature probes.
- Cycle Time: Manual mode from 2 to 21 minutes; Automatic mode from 3 to 20 minutes.
- Power Requirements: Operates on a 9 Volt Alkaline Battery.
- Operating Temperature: +32 º to 122 ºF (0 º to 55 ºC).
- Storage Temperature: -4 º to 131 ºF (-20 º to 55 ºC).
- Weight: 14 ounces.
Catalog excerpts
LINEAR POLARIZATION RESISTANCE (LPR) PORTABLE INSTRUMENT Features • Portable Corrosion Rate Monitoring • Imbalance(Pitting) Measurement • Solution Resistance Compensation • Temperature Measurement • C€ Compliant The Aquamate™ Linear Polarization Resistance is your best answer to the problem of getting quick and easy corrosion rate measurements in water systems. Simply plug the hand-held instrument into a LRP probe and press the measure key. In a few minutes the readout will display the corrosion rate in mils per year (MPY), the imbalance reading, conductivity, and, if you're using a LPR Temperature probe, the water temperature. The Aquamate™ LPR instrument's patented Solution Resistance Compensation extends the low conductivity operating range from cooling water to condensate, feedwater, and drinking water systems. Manual conductivity correction is not required. The true corrosion rate will conveniently be displayed when the alloy multiplier is pre-programmed. In addition, the Aquamate™ LPR instrument measures the imbalance current between the electrodes, which is related to pitting activity. The instrument fits easily in a shirt pocket and is powered by a single 9 volt battery. Considering the features and size, this instrument sets a new standard for portable corrosion rate monitoring instrumentation.
Open the catalog to page 1
Specifications Corrosion Rate Ranges Operating Range for LPR Aquamate Conductivity (uS/cm or urohos/cm) Operating rang* with conductivity correction appfcod Ordering Information Aquamate™ Portable corrosion rate, imbalance, temperature, and conductivity monitor with test probe P/N Aquamate LPR Instrument. Cosasco 11841 Smith Avenue Santa Fe Springs, CA 90670, USA Tel: 1-562-949-0123 Email: [email protected] Web Site: www.cosasco.com ©Rohrback Cosasco Systems, Inc. All rights reserved The contents of this publication are presented for information purposes only, and while effort has been made to...
Open the catalog to page 2All Rohrback Cosasco Systems catalogs and technical brochures
SIDE-STREAM ASSEMBLY3 Pages
RETRACTABLE SYSTEM BIO-PROBE2 Pages
BIO-PROBE3 Pages
Model 64004 Pages
DCMS®5 Pages
DCHA6 Pages
CORRDATA®2 Pages
WIRELESS SYSTEM7 Pages
MICROCOR® SYSTEMS4 Pages
Electrical Resistance (ER)4 Pages
COSASCO®3 Pages
MICROCOR®7 Pages
Cosasco Catalog492 Pages
- Fitting
- Hydraulic fitting
- Screw-in fitting
- Metal fitting
- Measuring device
- Threaded fitting
- T-shaped fitting
- Portable gauge
- Portable detector
- Measurement monitoring module
- Continuous monitoring module
- Temperature monitoring module
- High-pressure fitting
- High-precision gauge
- Production monitoring system
- Remote monitoring module
- Wireless monitoring module
- Online monitoring module
- Flange fitting
- Process probe