*mydirectindustry

RPMD-0100

Product catalog summary

Overview: The RPMD-0100 is a surface mount type photo diode designed for general-purpose applications. It features a compact size of 2.0×1.2×0.85mm and uses visible light-blocking resin for wavelengths below 750nm. It supports lead-free solders and complies with the RoHS directive.

Specifications:

Reverse Voltage: 60V
Power Dissipation: 30mW
Operating Temperature: -40 to +85°C
Storage Temperature: -40 to +100°C
Soldering Temperature: 260°C

Electrical Specifications:

Forward Voltage (VF): Typical 1.1V at 50mA
Reverse Breakdown Voltage (VBR): Minimum 60V
Reverse Dark Current (Id): Maximum 0.5nA at VR=10V
Reverse Light Current (Ira): 6-10μA at VR=5V, λ=940nm
Capacitance (Cj): 1.5pF at VR=5V, f=1MHz

Optical Characteristics:

Peak Emission Wavelength (λp): 940nm
Spectrum Half Width (λ0.5): 800 to 1050nm
Half Angle (θ1/2): ±60 degrees

Applications: Suitable for household applications, office automation (OA), and factory automation (FA).

Important Notes: The product is not recommended for new designs. It is intended for use in general electronic equipment and not designed to be radiation tolerant. For high-reliability applications, consultation with ROHM is advised. The product should not be used in aerospace, nuclear power control systems, or submarine repeaters.

Compliance and Safety: Users must comply with applicable environmental laws and regulations, including the RoHS Directive. Safety measures should be implemented to prevent personal injury or fire due to product failure.

Catalog excerpts

Surface mount type photo diode (Topview) Datasheet Applications • Household applications • OAs, FAs • Other general-purpose applications Features 1) Dimensions 2.0×1.2×0.85mm (L×W×H) 2) Visible light-blocking resin (<750nm) 3) Supports lead-free solders 4) RoHS directive Cathode mark Note : Unspecified tolerance shall be ±0.15. Internal connection diagram Anode Absolute maximum ratings (Ta = 25°C) Symbol Reverse voltage Power dissipation Operating temperature Storage temperature Soldering temperature *1 Reflow solder profile www.rohm.com © 2015 ROHM Co., Ltd. All righ

Open the catalog to page 1

RPMD-0100 Electrical specification (Ta = 25°C) Values Parameter Reverse dark current Reverse light current Forward voltage Reverse breakdown voltage Peak emission wavelength Spectrum half width Half angle Rise time Response time Fall time www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved.

Open the catalog to page 2

RPMD-0100 Electrical and optical characteristics curves Fig.2 Reverse Voltage vs. Photocurrent Fig.3 Forward Voltage vs. Forward Current Relative Spectral Sensitivity : [%] Optical Wavelength : [nm] www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved.

Open the catalog to page 3

Open the catalog to page 4

Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures....

Open the catalog to page 5

All ROHM Semiconductor catalogs and technical brochures

Archived catalogs

Quasi-resonant AC/DC Converter Built-in 1700 V SiC-MOSFET
36 Pages