Catalogs >
ROHM Semiconductor >
600V IGBT Intelligent Power Module (IPM) BM64374S-VA

600V IGBT Intelligent Power Module (IPM) BM64374S-VA
23Pages

Catalog excerpts

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 1

Datasheet Inverter for motor control 600V IGBT Intelligent Power Module (IPM) BM64374S-VA Key Specifications  IGBT Collector-Emitter Voltage VCESAT: 1.8V(Typ)  FWD Forward Voltage VF: 1.85V(Typ)  FWD Reverse Recovery Time trr: 100ns(Typ)  Module Case Temperature TC: -25 to +115°C  Junction Temperature Tjmax: 150°C General Description BM64374S-VA is an Intelligent Power Module composed of gate drivers, bootstrap diodes, IGBTs, fly wheel diodes. Features  3phase DC/AC Inverter  600V/15A  Low Side IGBT Open Emitter  Built -in Bootstrap Diode  High Side IGBT Gate Driver(HVIC): SOI (Silicon On Insulator) Process, Drive Circuit, High Voltage Level Shifting, Current Limit for Bootstrap Diode, Control Supply Under-Voltage Locked Out (UVLO)  Low Side IGBT Gate Driver(LVIC): Drive Circuit, Short Circuit Current Protection (SCP), Control Supply Under Voltage Locked Out (UVLO), Thermal Shutdown (TSD), Temperature Output by Analog Signal (VOT)  Fault Signal(LVIC) Corresponding to SCP (Low Side IGBT), UVLO Fault  Input Interface 3.3V, 5V Line  UL Recognized: UL1557 File E468261 W(Typ) x D(Typ) x H(Typ) 38.0mm x 24.0mm x 3.5mm Application  AC100 to 240Vrms(DC Voltage: Less Than 400V) Class Motor Control  Compressor Motor Control for Air Conditioner, Washing Machine, Refrigerator Typical Application Circuit 2 Figure 1. Example of Application Circuit ○Product structure: Semiconductor IC ○This product is not designed for protection against radioactive rays . www.rohm.com TSQ50501-BM64374S-2 © 2020 ROHM Co., Ltd. All rights reserved. 1/20

Open the catalog to page 1

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 2

LVCC LINW HINW HINV HINU VBW VBV Figure 2. Pin Configuration and Tc Detecting Point Pin Description Pin No. Pin Name U phase floating control supply V phase floating control supply Alarm output Detecting of short circuit current trip voltage Ground (Note 1) W phase floating control supply Temperature output U phase high side IGBT control W phase low side IGBT emitter V phase high side IGBT control V phase low side IGBT emitter W phase high side IGBT control U phase low side IGBT emitter Control supply for HVIC U phase low side IGBT control Inverter supply V phase low side IGBT control W...

Open the catalog to page 2

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 3

Block Diagram High Side Gate Driver (HVIC) HINU HINV HINW LINU LINV LINW NU Low Side Gate Driver (LVIC) NV Figure 3. Block Diagram Description of Block 1) High Side IGBT Drive (HVIC, Bootstrap Diode) High voltage level shifting circuit drives high side IGBT. Built-in bootstrap diode and current limit function for bootstrap diode enable HVIC to drive high side IGBT without external component (bootstrap diode, resistor). There is under-voltage-locked-out (UVLO) function for floating control power supply. 2) Low Side IGBT Drive (LVIC) LVIC drives low side IGBT. There is short circuit current...

Open the catalog to page 3

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 4

Absolute Maximum Ratings (Unless otherwise specified, Tj=25°C) Inverter Part Item Symbol Ratings Unit Supply Voltage Supply Voltage(Surge) Collector-Emitter Voltage Collector Current Applied between P-NU,NV,NW Applied between P-NU,NV,NW TC=25°C, less than 1ms TC=25°C, per 1 chip Collector Power Dissipation Control Power Supply Applied between HVCC-GND, LVCC-GND Floating Control Power Supply Control Input Voltage Fault Output Supply Voltage Applied between VBU-U, VBV-V, VBW-W Applied between HINX, LINX-GND (X=U,V,W) Applied between FO-GND Fault Output Current Current Sensing Input Voltage...

Open the catalog to page 4

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 5

Recommended Operating Conditions Item Conditions Applied between P-NU,NV,NW Applied between HVCC-GND, LVCC-GND Applied between VBU-U, VBV-V, VBW-W Supply Voltage Control Power Supply Floating Control Power Supply Control Power Supply Variation Control Input Voltage Current Sensing Input Voltage Blanking Time for Preventing Arm-short PWM Input Frequency High Side IGBT Minimum Input Pulse Width(Note1) Low Side IGBT Minimum Input Pulse Width(Note1) For each input signal Voltage Variation Between GND- NU, NV, NW Junction Temperature Between GND-NU, NV, NW (Including surge voltage) (Note 1) IPM...

Open the catalog to page 5

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 6

BM64374S-VA Control part Item Whole VCC Circuit Current 1 Control Input(HINU,HINV,HINW,LINU,LINV,LINW) H Level Input Current L Level Input Current H Level Input Threshold Voltage L Level Input Threshold Voltage Input Hysteresis Voltage HINU-GND Resistance HINV-GND HINW-GND Resistance (Note 1) Short Circuit Current Protection CIN Input Bias Current Trip Voltage Under Voltage Locked Out Monitor LVIC temperature Monitor LVIC temperature During VCC UVLO Operation Thermal Shutdown Trip Temperature Hysteresis Temperature Temperature Output VOT Voltage Fault Output(FO) Output low Voltage Leak...

Open the catalog to page 6

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 7

Mechanical Characteristics And Ratings Item Following Standard Mounting Screw M3 (Note 1) Recommended 0.69N･m (Note 2) Heat Sink Flatness Mounting Torque Load Control Pin:4.9N Power Pin:9.8N Load Control Pin: 2.45N Power Pin:4.9N 90deg. Bend Measurement point is provided in Figure 6-1. (Note 1) Plain washers of 8mm outside diameter (ISO 7089 to 7094) are recommended. (Note 2) When installing a module to a heat sink, excessive uneven fastening force might apply stress to inside chips or ceramic of heat sink plate, which will break or crack or degrade a module. An example of recommended...

Open the catalog to page 7

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 8

Typical Performance Curve 200 Figure 8. Magnification of Figure 7 Figure 7. IF vs VF Characteristic of Bootstrap Diode IF-VF Curve Between HVCC-VBX pin (X=U,V,W) Figure 10. VOT vs LVIC Tj (Characteristic of VOT pin VOT-Tj Curve) Figure 9. VFO vs IFO (Characteristic of FO pin VFO-IFO Curve) www.rohm.com © 2020 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001

Open the catalog to page 8

600V IGBT Intelligent Power Module (IPM) BM64374S-VA - 9

Timing Chart 1) Short Circuit Current Protection (protection with the external shunt resistor and RC filter) a1. Normal operation: IGBT ON and outputs current IC. a2. Short circuit current detection (SCP trigger) It is recommended to set RC time constant of 1.0µs so that IGBT shuts down within 2.0µs when SCP is triggered. a3. All low side IGBT’s gates are shut down (soft turn off). a4. All low side IGBTs turn off. a5. FO outputs for tFO=45µs (Min). a6. LIN=L a7. LIN=H, but all IGBTs keep OFF during SCP=H. a8. FO finishes output , but IGBTs don’t turn on until inputting the next ON...

Open the catalog to page 9