Test & Measurement R&S®TS-EMF EMF Measurement System Easy, frequency-selective measurement of EMF emissions

R&S®TS-EMF EMF Measurement System At a glance In combination with Rohde & Schwarz spectrum analyzers, the R&S®TS-EMF measurement system detects high-frequency electromagnetic fields in the environment (EMF). The isotropic antenna, together with the software, which has been specifically designed for EMF measurements, allows simple and precise evaluation of total and individual emissions on site. Measuring EMF emissions in line with national and international standards provides a basis for ensuring that transmitter systems comply with the applicable limits and for communicating this to the general...

R&S®TS-EMF EMF Measurement System Benefits and key features Safety based on exact measurements for reproducible and reliable results ❙❙ Evaluation of total emissions, individual radio ­ ervices or s individual frequencies ❙❙ Measurements in line with all common EMF ­ tandards s and measurement methods ❙❙ Correct evaluation of complex scenarios or RF ­ ignals s ❙❙ Excellent reproducibility using automated ­ easurements m ▷▷ page 4 Efficient on-site measurements ❙❙ Fast, efficient measurements thanks to predefined test routines ❙❙ On-site interpretation of results using integrated report generation...

Safety based reliable results Evaluation of total emissions, individual radio services or individual frequencies Discussion about radiation exposure frequently focuses on individual transmitter sites or radio services. However, it is important in all cases to measure and assess the total The R&S®TS-EMF measurement system provides an over- view of the total emissions along with the individual re- sults, e.g. for specific radio services. Moreover, for each subrange, the individual frequencies can be accessed to identify the emitters. Emissions that are not allocated to any measurement packet are...

£ RFEX - FAST System Softw File Configuration Export System Copyright 20D3 Rohdc iSchwarz Correct evaluation of complex scenarios or In an EMF measurement, it is important to ensure that sig- nals with different bandwidths, modulation schemes and timing structures are correctly detected. The R&S®TS-EMF measurement system meets this requirement by covering frequency subranges with individually configured mea- surement packets. This makes it possible to correctly mea- sure a mixture of different signals. The R&S®TS-EMF offers two different measurement modes: The R&S®RFEX-Fast measurement software...

Efficient on-site Fast, efficient measurements thanks to predefined test routines Predefined test routines and an automated test sequence allow measurements without a high expenditure on per- sonnel along with a fast response to special requests and discussions or questions at the test site. On-site interpretation of results using integrated report generation The automatically generated test report is useful for im- mediate evaluation of the measurement. The graphical presentation offers a fast overview, while the table shows precise results. Results are displayed as absolute values or as a %o...

Suitable for a wide range of applications Investigation of specific problems or radio signals by directly setting individual measurement parameters Besides handling standard measurements, the R&S®RFEX measurement software also allows detailed ­ onfiguration c of the measurement parameters. This makes the R&S®TS‑EMF an ideal tool for further in-depth analysis, as required for many studies, for example. Additional manual measurements using a fullfledged spectrum analyzer In many cases, the EMF measurement is only one out of a whole series of measurements, e.g. when commissioning base stations or...

Coverage of the complete frequency range from 9 kHz­to­6 GHz­using­isotropic­­ ntennas a Three isotropic antennas are used to cover the entire frequency range from 9 kHz to 6 GHz: ❙ Isotropic loop antenna, 9 kHz to 200 MHz ❙ Isotropic antenna, 30 MHz to 3 GHz ❙ Isotropic antenna, 700 MHz to 6 GHz Providing a frequency range from 9 kHz to 6 GHz, the antennas cover all common radio services as well as important standards such as EN 50400 and EN 50492. All services in the frequency range from 700 MHz to 6 GHz important to mobile radio and broadband services are covered with a single measurement...

Models The R&S®TS-EMF supports the following spectrum analyzers: R&S®RFEX-Fast R&S®RFEX Decoding WCDMA R&S®FSH-K40 required corresponding R&S®TSMW options required corresponding R&S®TSME options required R&S®RFEX-Fast option on analyzer with R&S®TSEMF-K12 and R&S®FSL-K400 or -U400 For support of other analyzers, see the R&S®TS-EMF user manual or contact Rohde & Schwarz R&S®TS-EMF with spectrum analyzer or EMI test receiver R&S®TS-EMF with Rohde & Schwarz spectrum analyzer or network scanner R&S®RFEX software Three isotropic antennas 9 kHz to 6 GHz network scanner Optional WCDMA and LTE decoding...

Specifications Isotropic antennas Measurement principle isotropic reception due to orthogonally arranged antenna elements that are electronically switched Frequency range Minimum detectable field strength Maximum field strength Mechanical design ≤ ±2.1 dB, ≤ ±2.5 dB (0.6 GHz to 2 GHz), ±1.0 dB (f = 900 MHz), ≤ ±2.2 dB (2 GHz to 3.6 GHz), ±1.7 dB (f = 1800 MHz) ≤ ±3.0 dB (3.6 GHz to 6 GHz) radome protection against mechanical damage and environmental hazards Antenna factor individual calibration data, saved on USB dongle and/or CD Axis switching RF solid state switch Connecting cables direct connection...

Ordering information Designation Order number Portable EMF Measurement System, requires R&S®TSEMF-Bx antenna, (without spectrum analyzer and notebook) Options R&S®TS-EMF Accredited Calibration for R&S®TSEMF-B1 or R&S®TSEMF-B2 (for R&S®TSEMF-B1 ISO calibration below 200 MHz, DAkkS above 200 MHz) 3) Keycode for R&S®RFEX Measurement Software on R&S®FSL spectrum analyzer (requires R&S®FSL-K400 or R&S®FSL-U400) WCDMA Decoding for R&S®TS-EMF (can be used with R&S®FSL/FSU/FSW spectrum analyzers and R&S®ESR/ESRP/ESU test receivers); includes R&S®TSEMF-U2 option WCDMA Decoding for R&S®TS-EMF (can be used...