video corpo

R&S®SMW200A Vector Signal Generator
24Pages

{{requestButtons}}

Catalog excerpts

R&S®SMW200A Vector Signal Generator - 1

Test & Measurement R&S®SMW200A Vector Signal Generator The fine art of signal generation

Open the catalog to page 1
R&S®SMW200A Vector Signal Generator - 2

R&S®SMW200A Vector Signal Generator At a glance The R&S®SMW200A is the vector signal generator for the most demanding applications. As a result of its flexibility, performance and intuitive operation, it is a perfect tool for generating complex, digitally modulated signals of high quality. The R&S®SMW200A is the ideal generator for digitally modulated signals required for the development of new wideband communications systems, the verification of 3G and 4G base stations or in the aerospace and defense sector. The I/Q modulation bandwidth of up to 160 MHz with internal baseband satisfies...

Open the catalog to page 2
R&S®SMW200A Vector Signal Generator - 3

R&S®SMW200A Vector Signal Generator Benefits and key features For all your needs ❙❙ Frequency range from 100 kHz to 3 GHz, 6 GHz, 12.75 GHz or 20 GHz ❙❙ Optional second RF path with 100 kHz up to 3 GHz, 6 GHz, 12.75 GHz or 20 GHz ❙❙ Versatile configuration: from single-path vector signal generator to multichannel MIMO receiver tester ❙❙ Ideal for MIMO, MSR or LTE-Advanced applications thanks to up to eight signal sources and up to 16 fading channels ❙❙ Modular architecture for optimal adaptation to the application at hand ▷▷ page 4 Simplify your setup ❙❙ Easy generation of complex signals...

Open the catalog to page 3
R&S®SMW200A Vector Signal Generator - 4

For all your needs Advanced RF measuring equipment must, above all, be flexible. Performance and functionality requirements vary depending on test setup and application. The R&S®SMW200A is unrivaled in mastering this challenge and sets new standards for signal generators. In development and verification, for any type of DUT (components, modules, complete base stations) – the R&S®SMW200A always generates the appropriate test signals. Versatile configuration Thanks to its modular design, the R&S®SMW200A can be equipped with the exact options required for a specific application. Any...

Open the catalog to page 4
R&S®SMW200A Vector Signal Generator - 5

Configuration example 1: A single-path R&S®SMW200A with internal baseband can be used for measurements on components or for fundamental receiver testing. Configuration example 2: A two-path R&S®SMW200A is i ­deal for receiver and performance tests on base stations. One g ­ enerator can generate wanted ­ signal plus interferer (in this e ­ xample, a wanted LTE signal and a 3GPP FDD interferer). Configuration example 3: A fully equipped R&S®SMW200A with MIMO ­ ption covers all key o MIMO ­ cenarios, such as 8x2 s shown in the screenshot. In this case, the baseband section provides eight...

Open the catalog to page 5
R&S®SMW200A Vector Signal Generator - 6

Simplify your setup Easy generation of complex signals A vector signal generator needs a powerful baseband section to meet the requirements of advanced communications systems. The R&S®SMW200A sets standards in this field too. Each of the two available baseband modules contains a realtime coder and an arbitrary waveform generator with max. 1 Gsample memory depth. The bandwidth of up to 160 MHz covers modern digital standards, such as LTE‑Advanced and WLAN IEEE 802.11ac, as well as wideband multicarrier or multistandard radio signals. The baseband signals can be digitally added, provided with...

Open the catalog to page 6
R&S®SMW200A Vector Signal Generator - 7

If one of the two RF paths is equipped with a 12.75 GHz frequency option, then only a single instrument is needed for out-of-band blocking measurements. An additional microwave signal generator is no longer required. Support of all important digital standards The R&S®SMW200A uses software options to generate signals for all important digital standards, particularly LTE/LTE-Advanced, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/ EDGE Evolution, TD-SCDMAand WLAN IEEE802.11a/b/ g/n/ac. The entire physical layer is simulated, as well as channel coding for the majority of standards. As a result, receiver...

Open the catalog to page 7
R&S®SMW200A Vector Signal Generator - 8

This simplifies operation and also saves valuable testing time, since no time-consuming waveform transfer from the external PC software to the signal generator's output As a result of its outstanding performance, the R&S®SMW200A responds virtually without delay to new settings, even when they require comprehensive signal calculations. Therefore, test scenarios can easily and quickly be adapted to new requirements. Parameters can be varied with immediate effect for optimization or troubleshooting, without causing unproductive interrup- tions or waiting time. Users benefit from numerous help...

Open the catalog to page 8
R&S®SMW200A Vector Signal Generator - 9

Efficient testing of amplifiers with envelope tracking The objective of envelope tracking (ET) is to reduce power consumption and the amplifier’s overall energy consumption. Instead of receiving a constant supply voltage, the amplifier is fed a voltage from a DC modulator. This voltage tracks the envelope of the RF signal. Extremely precise synchronization is crucial since even deviations in the nanosecond range would cause significant modulation e ­ rrors (EVM). The R&S®SMW200A offers options that allow users to very easily generate the right envelope signal for an RF signal in realtime...

Open the catalog to page 9
R&S®SMW200A Vector Signal Generator - 10

Bring reality to your lab Advanced, state-of-the-art channel emulation The internal fading simulator option is another element that distinguishes the R&S®SMW200A from other RF vector signal generators. Using latest FPGA technology the hardware was designed for exceptional compactness so that up to four of the powerful fading modules can be installed. These modules can simultaneously emulate as many as 16 fading channels. The maximum fading bandwidth is 160 MHz. As a result, the R&S®SMW200A can r ­ ealistically map even higher-order MIMO scenarios such as 3x3 MIMO for WLAN IEEE 802.11....

Open the catalog to page 10
R&S®SMW200A Vector Signal Generator - 11

The R&S®SMW200A easily handles even complex MIMO setups. The global system configuration dialog can be used to reconfigure the signal generator according to the required signal scenario. The block diagram on the GUI changes with the application so that the user can see at a glance which signal scenario is being generated. Every system configuration is accompanied by typical application examples. Users who “think beyond the standard” will also easily find an optimal scenario for their needs. As an alternative, the signals can be set individually in the R&S®SMW200A (separate sources mode)....

Open the catalog to page 11

All Rohde Schwarz catalogs and technical brochures

  1. R&S®FPL1000

    20 Pages

  2. R&S®HF907

    2 Pages

  3. R&S®EVSF1000

    12 Pages

  4. R&S®UMS175

    10 Pages

  5. R&S®AVHE100

    24 Pages

  6. HM8030

    2 Pages

Archived catalogs