Test & Measurement R&S®HMC8015 Power Analyzer All in one: the new compact class that has it all

R&S®HMC8015 Power Analyzer At a glance The R&S®HMC8015 power analyzer is the first compact tester for AC/DC load and standby current characterization that enables measurements without additional tools such as a computer or remote infrastructure. In addition to a numerical and graphical display with 26 key parameters, the instrument delivers performance and compliance protocols in line with IEC 62301, EN 50564 and EN 61000-3-2. The power analyzer is the only instrument in its class that graphically displays harmonic analysis up to the 50th harmonic on the logarithmic scale. Its user-configurable, dual-channel...

R&S®HMC8015 Power Analyzer Benefits and key features Clear display of all measured parameters ❙❙ Brilliant QVGA color display (320 x 240 pixel) ❙❙ Simultaneous display of up to 10 numerical measurement functions ❙❙ User‑configurable measurement display ❙❙ Graphical display modes 1) for inrush, harmonic analysis, waveform and trend chart Measurement accuracy ❙❙ Basic accuracy: 0.05 % ❙❙ Signal acquisition from DC to 100 kHz at a sampling rate of 500 ksample/s ❙❙ Simultaneous display of current and voltage, each with 16‑bit resolution ❙❙ Three‑stage filter system adaptable to the measurement task...

Enhanced functions As seen in the table, up to three options can be added to the base unit. They can be ordered directly from the factory (HOC15x) or at later time (HVC15x) as a voucher. HOC151/HVC151 advanced analysis option The advanced analysis option complements the base unit's measurands by also displaying peak values for voltage, current and power. These are acquired seamlessly at the full sampling rate of 500 ksample/s. The following additional graphic functions are available: Inrush function The inrush function makes it possible to graphically display switch-on behavior (see picture on...

Harmonic analysis Harmonic analysis can be displayed in a table or graph or even logarithmically for better readability. The bargraph can optionally show up to the 50th harmonic of voltage and/or current. The bargraph shows the am‑ plitude of the harmonic selected with the cursor. Waveform function The waveform function shows the voltage, current and power of an input signal period over time. The example shows a load with phase-angle control. Trend chart function The trend chart function makes it possible to observe longer periods of time and can be displayed on up to two channels. 15 selectable...

HOC152/HVC152 advanced I/O option The advanced I/O option activates the following additional functions: Sensor input A current‑proportional voltage of 100 mV, 1 V or 4 V (full‑scale amplitude) can be applied to the sensor input (4 mm safety connectors) in order to significantly expand the power measurement range. Current probes, current transformers and shunts can be connected to the input. The gradient (e.g. mV/A) can be set individually. PASS/FAIL function The PASS/FAIL function can be used to monitor up to six user‑defined (upper or lower) limits, which can be selected from a total of 14 measurands...

Specifications Specifications Analog bandwidth Frequency accuracy A/D converter resolution 0.1 % of reading voltage and current Basic accuracy Display resolution Sampling frequency Input impedance Filters Analog signal filter Digital filter depends on measurement frequency adaptive filter Frequency filter independent of analog signal filter Additional inputs/outputs Analog input Analog input accuracy Analog output Digital input Limits (PASS/FAIL) state Signal threshold logical zero logical one Digital output Network connection Power consumption Operating temperature range Storage temperature...

Measurement ranges Voltage, current: F = frequency in kHz Sensor input: F = frequency in kHz • 2 Additional measurement uncertainties Power factor < 1 - Common mode error ±0.01 % of peak value range These specifications apply between +20 °C and +30 °C at 80 % relative humidity after 60 min of warm-up time. Rohde & Schwarz R&S®HMC8015 Power Analyzer 8

Base unit (incl. power cable and manual) Power Analyzer Power Analyzer, with IEEE-488 (GPIB) interface Software options (firmware) Advanced Analysis, voucher upgrade Advanced Analysis, factory direct order Advanced I/O, voucher upgrade Advanced I/O, factory direct order Compliance Test, voucher upgrade Compliance Test, factory direct order External accessories (additional equipment, peripherals, etc.) Network Adapter for R&S®HMC8015, EU connector Network Adapter for R&S®HMC8015, GB connector Network Adapter for R&S®HMC8015, US connector Network Adapter for R&S®HMC8015, CHN/AUS connector 19" Rackmount...

Service that adds value ❙ ❙ ❙ ❙ ❙ Worldwide Local and personalized Customized and flexible Uncompromising quality Long‑term dependability About Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, radiomonitoring and radiolocation. Founded more than 80 years ago, this independent company has an extensive sales and service network and is present in more than 70 countries. The electronics group is among the world market leaders in its established business...