*mydirectindustry

Catalogs
Rohde Schwarz
R&S®HM8118 LCR-Bridge

R&S®HM8118 LCR-Bridge

Product catalog summary

Overview: The document provides technical specifications for the R&S®HM8118 LCR-Bridge, a device used for measuring inductance (L), capacitance (C), and resistance (R) among other parameters. It highlights key features, measurement capabilities, accuracy, and operational conditions.

Key Specifications:

Basic accuracy of 0.05%.
Measurement functions include L, C, R, |Z|, X, |Y|, G, B, D, Q, Θ, ∆, M, N.
Test frequencies range from 20 Hz to 200 kHz.
Capable of up to 12 measurements per second.
Supports both parallel and serial modes.
Includes a binning interface for automatic component sorting.
Internal programmable voltage and current bias, with external capacitor bias up to 40 V.
Galvanically isolated USB/RS-232 dual-interface, with optional IEEE-488 (GPIB).

Measurement Conditions:

Test signal voltage is 1 V with open and short corrections performed.
Measurement modes include Auto, L-Q, L-R, C-D, C-R, R-Q, Z-Θ, Y-Θ, R-X, G-B, N-Θ, M.
Accuracy for primary parameters is specified under certain conditions, with adjustments for FAST mode.
Ranges for various parameters such as |Z|, R, X, |Y|, G, B, C, L, D, Q, θ, ∆, M, N are detailed.

Operational Features:

Test frequency accuracy is ±100 ppm.
AC test signal level ranges from 50 mVrms to 1.5 Vrms.
Drive level accuracy is ±(5% + 5 mV).
Internal bias voltage ranges from 0 VDC to +5.00 VDC, with external bias up to +40 VDC.
Measurement time varies with frequency, with FAST mode at 70 ms and SLOW mode at 0.7 s.

Miscellaneous:

Includes error correction for open, short, and load conditions.
Front-end protection and temperature effects are specified.
Dual interface USB/RS-232 with optional IEEE-488 (GPIB).
Safety class I (EN61010-1) with power supply requirements of 110 V to 230 V.
Operating temperature range is +5 °C to +40 °C, with storage temperature from -20 °C to +70 °C.
Dimensions are 285 x 75 x 365 mm, and weight is approximately 4 kg.

Catalog excerpts

R&S®HM8118 LCR-Bridge Technical Data Technical Data Key facts ❙❙ Basic Accuracy 0.05 % ❙❙ Measurement Functions L, C, R, |Z|, X, |Y|, G, B, D, Q, Θ, ∆, M, N ❙❙ Test Frequencies 20 Hz…200 kHz ❙❙ Up to 12 Measurements per Second ❙❙ Parallel and Serial Mode ❙❙ Binning Interface HO118 (optional) for automatic Sorting of Components ❙❙ Internal programmable Voltage and Current Bias ❙❙ Transformer Parameter Measurement ❙❙ External Capacitor Bias up to 40 V ❙❙ Kelvin Cable and 4-Terminal SMD Test Adapter included ❙❙ Galvanically isolated USB/

Open the catalog to page 1

Measurement conditions and functions Accessories supplied: Line cord, operating manual, R&S®HZ184 4-terminal kelvin test cable, R&S®HZ188 4-terminal SMD component test fixture Recommended accessories: R&S®HO118 Binning interface galvanically isolated R&S®HZ42 19" rackmount kit 2RU R&S®HZ181 4-terminal test fixture including shorting plate R&S®HZ186 4-terminal transformer test cable

Open the catalog to page 2

R&S®HM8118 LCR-Bridge

R&S®HM8118 LCR-Bridge

Catalog excerpts

All Rohde Schwarz catalogs and technical brochures

Archived catalogs