Catalogs >
Rohde Schwarz >
R&S®FPL1000

R&S®FPL1000
20Pages

Catalog excerpts

R&S®FPL1000 SIGNAL AND SPECTRUM ANALYZER Experience high performance wherever you take it Product Brochure Version 08.01

Open the catalog to page 1

AT A GLANCE The R&S®FPL1000 signal and spectrum analyzer makes measuring fast and simple. The intuitive touchscreen is straightforward and easy to use. With solid RF performance, light weight and small footprint, the R&S®FPL1000 combines the functions of a benchtop instrument with the portability of a handheld instrument. In an RF lab, the R&S®FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of...

Open the catalog to page 2

One instrument for multiple applications range: 5 kHz to 26.5 GHz ► SSB phase noise: –108 dBc (1 Hz) at 10 kHz offset to the 1 GHz carrier ► DANL with preamplifier: –160 dBm from 10 MHz to 2 GHz ► Lightweight with small footprint ► Battery pack and 12 V/24 V power supply (option) ► Use with power sensors (option) ► YIG preselector bypass for full 40 MHz bandwidth analysis over 6 GHz (option) ► 40 MHz analysis bandwidth (option) ► Analog and digital signal analysis (option) ► Internal generator up to 7.5 GHz (option) ► Gated sweep, narrowband resolution filters and spectrogram measurements...

Open the catalog to page 3

ONE INSTRUMENT FOR MULTIPLE APPLICATIONS The R&S®FPL1000 is a single instrument for many types of measurements. You can use it for spectral measurements, for highly accurate power measurements with power sensors and for analyzing analog and digitally modulated signals. Spectrum analysis Signal analysis of analog and digitally modulated signals The R&S®FPL1000 is a true allrounder, even in its basic configuration for spectral measurements that includes: ► Spectrum analysis ► Wide range of spectral measurement functions, such as channel power, ACLR, signal-to-noise ratio, spurious, harmonic...

Open the catalog to page 4

Scalar frequency response measurement Noise figure and gain measurements Equipped with the R&S®FPL1-B9 option, the R&S®FPL1000 offers an internal CW source and a tracking generator for quick and easy measurement of frequency response, filters and attenuation. The n-dB down marker determines the 3 dB bandwidth of a bandpass filter at the press of a button. Precision is enhanced by through, short and open normalization methods. In addition, the R&S®FPL1-B9 option allows characterization of two-port devices such as power amplifiers or limiters. The internal generator here is switched to power...

Open the catalog to page 5

SOLID RF PERFORMANCE Featuring a phase noise of –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of +20 dBm, 1 Hz to 10 MHz resolution bandwidth and –166 dBm displayed average noise level, the R&S®FPL1000 is comparable to higher class analyzers. This makes it ideal for labs, production and servicing. The 1 dB attenuator step size (R&S®FPL1-B25 ption) and the preamplifier o (R&S®FPL1-B22 option) xtend the usable ynamic range e d and sensitivity. 40 MHz signal analysis bandwidth The signal analysis bandwidth defines the frequency range in which all level and...

Open the catalog to page 6

INTUITIVE USER INTERFACE The R&S®FPL1000 is as intuitive as a smartphone. You can configure the instrument and perform measurements with the touchscreen. A one-finger swipe across the screen adjusts the center frequency or the reference level. Two-finger gestures adjust the displayed span or level range. High-resolution display Flexible arrangement of results and MultiView The 10.1" screen with 1280 × 800 pixel resolution provides a precise representation of the signal. The soft menu keys and the information fields are arranged so that the signal appears true to detail with the highest...

Open the catalog to page 7

10.1" HIGH-RESOLUTION DISPLAY 10.1" high-resolution display 1280 × 800 pixel resolution Hardkeys For setup, presets, etc. Two USB 2.0 ports ► For storage media ► For connecting accessor

Open the catalog to page 8

Soft menu selection ► Quick access to key tools ► Hardware settings at a glance Measurement setup buttons Control knob Numerical keypad With unit keys for frequency and level Generator output Internal generator output Rohde & Schwarz R&S®FPL1000 Signal and Spectrum Anal

Open the catalog to page 9

FULLY PORTABLE The R&S®FPL1000 signal and spectrum analyzer can be used almost everywhere. With a depth of only 23 cm, it fits into any workplace and leaves enough space for DUTs and other measuring instruments. Its low weight of 6 kg and carrying handle mean you can take it wherever you need it. Carrying bag and shoulder harness Battery pack and 12 V/24 V power supply (option) Users who need the functions of a benchtop instrument and the flexibility of a handheld instrument can use the shoulder harness. Measurements where the instrument needs to be carried, such as interference hunting,...

Open the catalog to page 10

R&S®FPL1-K7 AM/FM/PM ANALOG DEMODULATION The R&S®FPL1-K7 option converts the R&S®FPL1000 into an analog modulation analyzer for amplitude, frequency and phase modulated signals. It measures the characteristics of useful modulation and other items such as residual FM or synchronous modulation. Typical R&S®FPL1-K7 applications include: ► Transient and settling measurements on oscillators such as VCOs and PLLs ► Troubleshooting AM/FM transmitters ► Simple chirp analysis of pulsed or continuous wave signals Display and measurement capabilities ► Modulation signal versus time spectrum of...

Open the catalog to page 11

R&S®FPL1-K30 NOISE FIGURE AND GAIN MEASUREMENTS The R&S®FPL1-K30 noise figure and gain measurement option 1) allows you to characterize the most important amplifiers specifications. Using the Y-factor method, the noise figure and gain are measured with high accuracy independent of the instrument’s own noise figure. Typical R&S®FPL1-K30 applications include amplifier characterization. The following parameters can be measured at a specified frequency or in a selectable frequency range: ► Noise figure in dB ► Gain in dB ► Y-factor in dB The noise source is controlled by the 28 V output on the...

Open the catalog to page 12