Mixed Signal Oscilloscopes

HMO3000 product video: Scan, click or go to http://youtube.com/ HAMEGcom Precise signal analysis Intelligent user interface Quick view 4 GSamples/s sampling rate 8 MPoints memory To optimize the screen display, the instrument shows and hides menus At the push of a button the 16 most important values of the measured signal are permanently updated and displayed Setup Intuitive, multi-lingual user menu Help Context-sensitive help HMO 3004 Series, 500 MHz with 4 Channels Math Wide range of programmable math functions Zoom Memory zoom up to 200,000 : 1 Analog channels Vertical sensitivity of up to...

up to 500 MHz… High sensitivity, multi-functionality and a great price – that‘s what distinguishes the HAMEG HMO3000 oscilloscope series. Key facts ❙ 4 GSa  s real time, low noise  /  ash A /D converter ❙ 8 MPts memory, zoom up to 200,000:1 ❙ MSO functionality included as standard (HO3508/HO3516 logic probe with 8/16 channels required) ❙ Automatically or manually adjustable memory depth ❙ Vertical sensitivity up to 1 mV/div. ❙ Trigger modes: slope (A/B), pulse width, video, logic, serial buses (optional), hold-off ❙ Serial bus trigger and hardware accelerated decode incl. list view. Options:...

Precise Signal Analysis An excellent sampling rate in combination with a large memory depth is the key for precise signal analysis. The highly resolved measurement data and the powerful zoom function expose even minor signal details. Depending on their requirements users can choose between three 2-channelversions and three 4-channel-versions with bandwidths ­ etween 300 and b 500 MHz. Key facts Sampling rate (per analog channel) Memory depth per channel Maximum memory Maximum number of logic channels Input impedance 4 HAMEG INSTRUMENTS | HMO3000 SERIES Maximum sampling rate

Bandwidth Upgrade Should your requirements change, then so does the HMO3000, as the 300 and 400 MHz models can be extended to 500 MHz bandwidth via software upgrades whenever required. ❙❙ For 300 MHz models with options HOO352 (2 channel) and HOO354 (4 channel). ❙❙ For 400 MHz models with options HOO452 (2 channel) and HOO454 (4 channel). More information | www.hameg.com 5

Mixed Signal Always a MSO The mixed signal functionality is always included in the HMO3000 series with no software option being necessary to unlock it. HAMEG logic probes are not linked to a specific    instrument serial number. This allows their use with all digital HAMEG oscilloscopes in the HMO series. 6 HAMEG INSTRUMENTS | HMO3000 SERIES

Mixed Signal HAMEG is offering the new HMO3000 series exclusively as a mixed-signal oscilloscope. The great advantages of these instruments are best illustrated by taking a look at how ADCs (Analog Digital Converter) or DACs (Digital Analog Converter) are integrated. These transformer modules include an analog signal on the one side and a digital signal on the other side. As with HAMEG's new HMO3000 series, MSOs allow developers the assessment of the time component for both signal types on one monitor. As shown in the image below the latency time of a DAC can be determined with one simple cursor...

Frequency Analysis Due to the outstanding FFT functionality of the HMO series oscilloscopes signals can also be analysed in the frequency domain with up to 65,536 points. Additional practical tools such as cursor measurement as well as peak-detect-functions are also available. They allow engineers to complete their analysis significantly faster, also in the frequency domain. Figure 1: A sinusoid signal that at first sight appears undistorted Figure 2: The frequency spectrum exposes the signal distortion For non-periodic input signals most instruments offer the option to trigger the spectrum at...

^^^^^^ LOGIC CHANNELS ^^^^^ More information | www.hameg.com 9

SPI / I C / UART/RS-232 bus analysis for all oscilloscopes of the HMO series CAN / LIN bus analysis for all oscilloscopes of the HMO series I2C bus hex decoding on the analog channel I2C, SPI, CAN or LIN – in terms of interaction with the outside world for embedded systems, it is safe to say that these are the most commonly used communication protocols. The new HMO3000 series by HAMEG Instruments offers you hardware-accelerated signal triggering and decoding for all of these protocols. You can upgrade your instrument via software licence keys with those functions required to develop your application:...

HMO3004 series 4 channel mixed signal oscilloscope HMO3002 series 2 channel mixed signal oscilloscope More information | www.hameg.com 11

Technical Data Aging Refresh operating modes Roll operating modes Application memory: Deskew: Step size Search functions: Slope, Pulse, Peak, Rise-/Falltime, Runt up to 8 user definable marker for easy naviga­ tion; automatic marker function based on search criteria 8 MByte for references, device settings and formulars Interface: Internal 2x USB-Host (type A) (1x front side, 1x rear side), mass storage (FAT16/32) HO730 Dual-Interface Ethernet/USB-Device (type B) DVI-D (480 p, 60 Hz) for external display, HDMI compatible HO730 Built-in Ethernet/USB dual-interface card Printed operating manual...

IEEE-488 (GPIB) interface card, galvanically isolated High voltage probe 1000:1 (400 MHz, 1000 Vrms) 500 MHz passive probe 10:1 with automatic identification Upgrade from 2 x HZ350 to 2 x HZ355, only available when purchasing a HMO3000 (300 MHz / 400 MHz models) Active differential high voltage probe Carrying case for protection and transport AC/DC current probe 30 A, DC to 100 kHz AC/DC current probe 100/1000 A, DC to 20 kHz 1 GHz active probe (0.9 pF, 1 MΩ, including many accessories) More information | www.hameg.com 13