RogaDAQ2
15Pages

INTELLIGENT MEASURING EQUIPMENT www.roga-instruments.com RogaDAQ2 Portable Data Acquisition and Analysis Analog Inputs BNC-Inputs 2, for analog signals Simultaneously sampling ADCs 2 Resolution 24 Bit Sampling rate 48 kHz max. Range input ±5 V max. Selectable AC- or DC-coupling Selectable IEPE sensor supply (4 mA/28 V) Self adjusting Anti-Aliasing filter Accuracy better ± 0,1 dB, Dynamic Range > 100 dB, THD < 0,005%, Frequency Response ± 0,05 dB Channel deviation < 0,01 dB, < 0,05° Channel separation > 85 dB RogaDAQ2 is a high performance portable Data Acquisition Device. It features two high quality, high speed, simultaneous sampling inputs. Supported PC Systems Win95, Win98, WinME, Win2000, WinXP & Vista ROGA-Instruments makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice.

RogaDAQ2 Rev. 1.5 - 04.2009 2 channel sound card version

Dear Customer! Congratulations on the purchase of your RogaDAQ2 SC. This Product has been carefully designed and engineered to provide you with a precise and reliable data acquisition instrument. Please read this instruction manual before using the product, and keep it at hand for reference. You’re ROGA-Instruments-Team 1. Introduction 1.1 System Requirements PC with compatible OS and one available USB-connector (USB1.0, 1.1 or USB 2.0) 1.2 Included Parts Following parts are included: • 1 RogaDAQ2 2-Channel-DAQ • 1 USB-cable • 1 CD ROM • 1 carrying case 1.3 Safety Information– read before...

2.2 Installation Start your PC. Microsoft Windows ME, Windows 2000, Windows XP or above should be installed. These operating systems do not require additional drivers. The RogaDAQ2 will be automatically detected and installs it as USB-Audio-Device. You may now use your RogaDAQ2 with any software supporting Windows PC soundcards. 3. Making Measurements 3.1 Scaling The RogaDAQ2 outputs the analog signals as signed 16bit PCM data with a range of -32.768 to +32.767. The maximum values represent the maximum input range (e.g. +32.767 = 5V; -32.768 = -5V). The input range is defined as peak...

Playback Recording Sounds I Select a recording device below to modify its settings: RealtekHigh Definition fVudio RealtekHigh Definition iudio Microphone Array Microphone Array Properties General | Custom | LeveJs Default Format Select the sample rate and bit depth to be used when running Exclusive Mode !2] Allow applications to take exclusive control of this device 13 Give exclusive mode applications priority Restore Defaults

The IEPE on/off function can be used to enable or disable the IEPE 24V/4mA constant current supply for direct connection of ICP* compatible sensors, by using the “AGC or Bass boost (Loudness) On/Off” check box at the Windows soundcard properties. RogaDAQ2 Rev. 1.5 - 04.2009 2 channel sound card version

4. Care and Maintenance This equipment does not require scheduled or preventive maintenance. If you handle it with care, it will be a reliable tool. Should your RogaDAQ2 require cleaning, use a damp cloth or mild cleaning fluid. Take care not to get any fluid in or around the connectors. If your RogaDAQ2 requires manufacturer inspection and calibration, please contact your vendor. RogaDAQ2 Rev. 1.5 - 04.2009 2 channel sound card version

5. Troubleshooting: In case you experience problems with your RogaDAQ2: - Check that it is correctly recognized and installed by Windows. A USB- Audio device should be found under Audio, Video and Game controller in the device manager. Select RogaDAQ2 SC as default device under Properties of Sound and Audio devices - Some application software requires manual selection of the recording and playback device. Please refer to the manual or help function of your application software. If you continue to experience problems, please contact your vendor. 6. Specifications (typical, fs=48kHz,...

RogaDAQ2 NVH Analyzer & Recorder Getting started with DEWESoft FFT Analyser For Windows Vista users: Before you setup the DEWESoft program under Windows vista, please make sure that the at the control panel; user account the “User Account is turned off”. At the CD ROM media you will find the DEWESoft6.xx_Fullinstaller.exe Please double click to this file, and select “DEWESoft for Demo mode” than click next. RogaDAQ2 Rev. 1.5 - 04.2009 2 channel sound card version

DEWESoft 6.5 Full Installer Build(0740) Setup Type Select the setup type that best suits your needs. Set the type of setup you prefer to install DEWE Soft 6.5 2. DEWESoft for Demo mode 3. DEWESoft forVGPS mode 4. DEWESoft for DEWEConfig mode Installs DEWESoft with settings prepared for Demo mode.

Please follow the installer until DEWESoft being installed. After the setup you will find 2 icons on the Desktop; please click to DEWEsoft6x icon. In the next step it is necessary to define the DAQ device in the analyser software by using “System” and “Hardware Setup” Uncheck all “Dewetron Modules” and select the Audio card at the Analog device pop up window. In case of connected RogaDAQ2 at the PC, you can select the RogaDAQ2. RogaDAQ2 Rev. 1.5 - 04.2009 2 channel sound card version

Hardware setup Analog device Card FOUND Dewetron modules Card setup Grouping Audio devices Registration status

Analyse Setup Overview Scope Recorder | Store Stop Control properties Analysis type

If you have any further questions, please refer to the online help DEWESoft manual, or contact: ROGA-Instruments Sales Office for Measurement Solutions Steinkopfweg 7; D-55425 Waldalgesheim Germany Phone: +49 (0) 6721 - 9844 - 54 Fax: +49 (0) 6721 - 9844 - 74 E-Mail: info@roga-instruments.com ICP* is a registered trademark of PCB-Piezotronics RogaDAQ2 Rev. 1.5 - 04.2009 2 channel sound card version