LX-100 Series LX-110 / LX-120
2Pages

Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use.R ROGA Instruments Steinkopfweg 7, 55425 Waldalgesheim, Germany Phone : +49-6721 984454 FAX : +49-6721 984474 URL : http://www.roga-instruments.com Copyright TEAC CORPORATION 2008 PRINTED IN JAPAN 0308 1 NH BSC-030A DC Input Amp PA Input Amp Strain Input Amp Input Input and Output Input Input and Output Input Input and Output 8ch 16ch 32ch 8ch 16ch 8ch 16ch 32ch 8ch 16ch 8ch 16ch 32ch 8ch 16ch 3.6/7.9 3.9/8.6 6.1/13.4 3.9/8.6 6.1/13.4 3.6/7.9 3.9/86 6.1/13.4 3.9/8.6 6.1/13.4 3.6/7.9 3.9/7.9 6.1/13.4 3.9/8.6 6.1/13.4 3.7/8.1 4/8.8 6.2/13.6 4/8.8 6.2/13.6 3.7/8.1 4/8.8 6.2/13.6 4/8.8 6.2/13.6 3.7/8.1 4/8.8 6.2/13.6 4/8.8 6.2/13.6 30 36 48 36 48 35 46 66 46 66 40 56 86 56 86 36 42 56 42 56 41 52 76 52 76 46 62 92 62 92 ( AR-LXDC100 ) ( AR-LXPA100 ) ( AR-LXST100 ) --- --- --- Unbalanced --- --- --- Unbalanced --- --- --- Unbalanced --- --- --- DC --- --- --- DC --- --- --- DC --- --- --- 75 ohm --- --- --- 75 ohm --- --- --- 75 ohm --- --- --- +/-1 to 5 V , 0.1 V Step --- --- --- +/-1 to 5 V , 0.1 V Step --- --- --- +/-1 to 5 V , 0.1 V Step --- --- --- Combination of Analog fillter + Digtal fillter --- --- --- Combination of Analog fillter + Digtal fillter --- --- --- Combination of Analog fillter + Digtal fillter --- --- --- DC to the sampling frequency(listed above)/2.4 +/-0.5dB --- --- --- DC to the sampling frequency(listed above)/2.4 +/-0.5dB --- --- --- DC to the sampling frequency(listed above)/2.4 +/-0.5dB --- --- --- 16 / 24 Bits --- --- --- 16 / 24 Bits --- --- --- 16 / 24 Bits --- --- --- 128 times over sampling delta sigma method : --- --- --- 128 times over sampling delta sigma method : --- --- --- 128 times over sampling delta sigma method : however 64 times over sampling at 40kHz however 64 times over sampling at 40kHz however 64 times over sampling at 40kHz --- --- --- +/-0.1 % or less --- --- --- +/-0.1 % or less --- --- --- +/-0.1 % or less --- --- --- +/-0.2 % or less --- --- --- +/-0.2 % or less --- --- --- +/-0.2 % or less --- --- --- +/-0.1 % or less --- --- --- +/-0.1 % or less --- --- --- +/-0.1 % or less --- --- --- 87 / 93 dB ( in band ) ( 1V input ) --- --- --- 87 / 93 dB ( in band ) ( 1V input ) --- --- --- 87 / 93 dB ( in band ) ( 1V input ) --- --- --- -78 dB (At 20 kHz or less) -75 dB (At 40 kHz or less) --- --- --- -78 dB (At 20 kHz or less) -75 dB (At 40 kHz or less) --- --- --- -78 dB (At 20 kHz or less) -75 dB (At 40 kHz or less) --- --- --- 1 deg or less (At 20 kHz or less) 3 deg or less (At 40 kHz or less) --- --- --- 1 deg or less (At 20 kHz or less) 3 deg or less (At 40 kHz or less) --- --- --- 1 deg or less (At 20 kHz or less) 3 deg or less (At 40 kHz or less) --- --- --- BNC --- --- --- BNC --- --- --- BNC Unbalanced Balanced and Unbalanced Balanced and Unbalanced DC Balanced DC, Balanced AC, Unbalanced DC DC 1 M ohm 1 M ohm 1 M ohm +/- 0.5/1/2/5/10/20/50 V +/- 0.01/0.0316/0.1/0.316/1/3.16/10/50 V DC mode : +/- 1/2/5/10 V, ST mode : 500/1000/2000/5000/10000/ 20000/50000/100000 microST, Precision(range value) +/-1% or less +/- 100 V +/- 50 V, but +/-100 V in the +/-50V range +/- 25V Joint use of both a digital filter(*) and an analog filler(2nd Order Butteworth) Joint use of both a digital filter(*) and an analog filler(2nd Order Butteworth) Joint use of both a digital filter(*) and an analog filler(2nd Order Butteworth) 10,30,100,300,1k,3k,10k,30kHz,Pass:-48dB OCT Butterworth filter (Switched --- --- Capacitor Filter = SCF) for 8 channels indeependent;At LPF to Pass Joint use of both a digital filter(*) and an analog filter (2nd Order Butterworth) DC to the sampling frequency ( listed above )/2.4 DC Coupling : DC to the sampling frequency (listed above)/2.4, DC Method : DC to the sampling frequency (listed above)/2.4, +0.5/-3 dB +/-0.5 dB AC Coupling : 1Hz to the sampling frequency (listed above)/2.4, +/-0.5 dB ST Method : DC to 30 kHz, +0.5/-3 dB 16bits/24Bits 16bits/24Bits 16bits/24Bits 128 times over sampling delta sigma method : however 64 times over sampling at 40kHz 128 times over sampling delta sigma method : however 64 times over sampling at 40kHz 128 times over sampling delta sigma method : however 64 times over sampling at 40kHz +/-0.1 % or less +/-0.1 % or less +/-0.1 % or less DC mode : same as DC100 ST mode : ( SCF : 10kHz, 30kHz), Sampling Frequencies 24kHz, 96kHz 10000microST 0.1% or less +/-0.1 % or less +/-0.1 % or less +/-0.1 % or less 1 deg or less ( At 20 kHz or less ), 3 deg or less ( At 400 kHz or less ) 1 deg or less ( At 20 kHz or less ), 3 deg or less ( At 400 kHz or less ) 1 deg or less ( At 20 kHz or less ), 3 deg or less ( At 400 kHz or less ) --- Possible ( V 0.9 ) --- BNC BNC Lemo 7-pin, 10ø (ECG0 Type ) Main Body * LX-110 / LX-120 Number of Channels * 8 / 16 / 32 Amplifier * DC / PA / Strain / Output Recording Devices * Internal Memory / PC card Interface * Ethernet / Firewire(IEEE1394) Remote Control Unit / PC Accessories DC Cable AC Adapter LX Navi software Sampling Frequenies Input Range Distortion factor 48k, 96kHz 0.316V or over +/-0.1% or less 0.1V or less +/-0.2% or less 24k or less All +/-0.4% or less Sampling Frequenies Measurement Fequency Distortion factor 96kHz 20kHz +/-0.1% or less 48kHz 10kHz +/-0.07% or less 24kHz or less fs / 4.8 +/-0.4% or less Weighting FLAT/A/C HPF OFF/10/20 Hz Supply voltage 28V DC/4mA for a sensor Gauge Factor 2.0 Bridge Connection Full Bridge Applicable Gauge Resistance 120 to 2000 ohm Bridge Method DC Remote Sensing Possible Bridge Voltage 2V (+/-1V) Balance Range +/- 10000 microST 10V(+/-5V) Balance Method By electronic auto balance Input Range band ( dB ) 20kHz 40kHz 0.01V 64 / 67 60 / 63 0.0316V 74 / 77 69 / 72 0.1V 83 / 86 77 / 80 0.316 / 1 V 87 / 93 77 / 80 3.16 / 10 / 50 V 87 / 98 77 / 80 Input Range band ( dB ) 20kHz 40kHz or less All -82 / -88 -80 / -86 ( in band ) ( in band ) Input Range band ( dB ) Other of 20V 84 / 96 ( in band ) 20V 84 / 94 ( in band ) Input Range band ( dB ) 1kHz 3kHz 10kHz 20kHz 40kHz 0.25 mV/V 67 62 58 --- --- 0.5 mV/V 73 68 64 --- --- 1 mV/V 75 74 71 --- --- 2.5 / 5 / 10 / 25 / 50 mV/V 75 75 75 --- --- 1 / 2 / 5 / 10 V --- --- --- 87/93 77/83 Input Range band ( dB ) 20kHz 40kHz 0.01V -64 -60 0.0316V -73 -69 0.1V -78 -74 0.316 / 1 / 3.16 / 10 / 50 V -78 -74 Input Range band ( dB ) 1kHz 3kHz 10kHz 0.25 mV/V -67 -62 -58 0.5 mV/V -73 -68 -64 1 mV/V -75 -74 -71 2.5 / 5 / 10 / 25 / 50 mV/V -75 -75 -75 96 / 48 / 24 / 12 / 6 / 3 / 1.5 kHz ( Common to each Channel ) 102.4 / 51.2 / 25.6 / 12.8 / 5.12 / 2.56 / 1.28 kHz 65.536 / 32.768 / 16.384 / 8.192 / 4.096 / 2.048 / 1.024 kHz 100 / 50 / 20 / 10 / 5 / 2 / 1 kHz ( Common to each Channel ) Num. of Input Channels : 12 x 16 bit Channels, 2 x 32 bit Channels (Highest sampling frequncy settings support the moving average only at one(1))(Cannot be used simultaneously with generator output ) Use the lowest 1bit for techometer pulse timing bit. Input Format : Threshold level selections +0.5/1/2.5/10/20 V ( Max allowable input voltage is 50V ) Input Connector : BNC Frequency Division Ratio Setting : 1 to 255 Moving Average Measurement : 1 to 16 Measurement Mode : Pulse count mode(Count of number of pulses within the gate time; Conunt of the total number from start to stop), Cycle count mode, Frequncy measurement mode, RPM mode (Cannot be used simultaneously with tachometer pulse input ) Num. of Output Channels : 1 Output signal : Sine wave, Sweep Sine wave, Pulse, Pink noise, White noise 2 / 4 / 8 / 16 / 24 / 32 ch Choice of Memory only ,Memory + PC card drive * PC card is Flash memory , supports up to 8GB capacity ( FAT16 or FAT32 ) Choice of 10BASE-T/100BASE-TX or Firewire ( IEEE1394 ) ( Specify one when you order ) REC, FWD, REC FWD, STOP, PAUSE, EVENT, P.LOCK 1 ( analog output ) , BNC +/-1 to 5 V ( 0.1 V step ) 1 1 each Memory Approx. 1.6 MB/s, PC card Approx.0.8 MB/s Firewire ( IEEE1394 ) Approx. 1.6 MB/s, Ethernet Approx. 0.8 MB/s +/-1 ppm ( 25 deg C ) 5 to 35deg C, Humidity 20 to 85%RH ( Operation ) +/- 30 seconds adjustment 11 to 30 V DC CE, VCCI Conforms to MIL-STD-810 Figure 514.4-1,2,3 for the models with memory only memory + PC card drive Approx 300 x 65 x 200 mm Approx 11 13/16" x 2 9/16" x 7 7/8" Low speed sampling Cutoff Frequency Attenuation 1kHz 400Hz -80dB ( at 500Hz ) 500Hz 200Hz -80dB ( at 250Hz ) 200Hz 80Hz -80dB ( at 100Hz ) 100Hz 40Hz -80dB ( at 50Hz ) 50Hz 20Hz -80dB ( at 25Hz ) 20Hz 8Hz -80dB ( at 10Hz ) ( Aliasing may occur at 10/5/2/1Hz 4Hz -80dB ( at 5Hz ) and under 5Hz sampling ) 2/5/10/30/60s (cycle) 4Hz -80dB ( at 5Hz ) S/N is a difference of noise level for 100% of each input range. Dynamic range is the greatest input level and a difference of noise level of each input. Dynamic range S/N +2dB The overall accuracy specified here is the accuracy of the analog output when using an input amp and an analog output amp, and may differ depending on the frequency characteristics and the input range of the input amp. Sampling Frequencies LX-110 LX-120 Sampling Frequencies LX-120 only Tachometer Pulse Input LX-120 only Generator Output LX-120 only Input Channel change Recording Devices Inteface Front Panel Control Keys Monitor Channel Monitor output level Microphone Jack Speaker and Earphone Jack MAX. Recording Rate PC Throughput Time Precision Temperature and Humidty Internal Clock Correction Power Supply Safety Standards Vibration External Dimension (WxHxD) (Excluding protruding parts) Input Format Input Coupling Input Impedance Input Range (over-range to +/-127%) Absolute Max. Input Voltage Anti aliasing filter LPF Frequency Bandwidths Num,of Quantizing Bits Conversion Method Linearity Distortion Factor Range Accuracy Signal to Noise ratio (16bits/24bits) (25 deg C) Crosstalk Inter-channel phase difference TEDS sensor Input Connecter Type Output Format Output Coupling Output Impedance Output Range Smoothing Filter Frequency Bandwidths Num,of Quantizing Bits D/A Conversion Method Linearity Distortion Factor Range Accuracy Signal to Noise ratio (16bits/24bits)(25 deg C) Crosstalk Inter-channel phase difference Output Connecter Type Weight LX-110 Approx (kg/lb) LX-120 Power LX-110 Consumption(W) LX-120 Input Amp Type I/O Type Channels LX-100 Series Specification Output amplifier Input amplifier Main body * Specify one when you order LX-100 Series LX-110 / LX-120 - FAT32 file system for large capacity card - 100dB dynamic range by 24 bits AD - Records voltage, sound, vibration and strain from DC to 40kHz - Supports various popular analysis software formats - Records in TAFFmat data format. LX-100 Series data acquisition and recording system pursues the usability and reliability in the field. LX-100 Series supports FAT32, 24bits AD conversion and RoHS ( Restriction of Hazardous Substances ). Pursuit of "Usability" and "Speed". LX-100 Series Endless evolution of data recording http://www.roga-instruments.com Data Recording and Acquisition Unit RoHS Compliant