WS 5.4503 Workholding Systems MC-P Z Balance
2Pages

WS 5.4503 Workholding Systems MC-P Z Balance position flexible clamping, mechanically operated jaw widths 60, 100 and 125 mm Advantages ●●Patented segment design ●●Clamping without deformation of workpieces by position flexible clamping point ●●Clamping system also suitable for concentric clamping ●●Compact design ●●High precision and accuracy of the manufactured workpieces by high rigidity ●●Sturdy design and good swarf protection ●●Large jaw openings ●●Extensive range of jaws ●●Clamping of raw and finished parts without retrofitting ●●Easy to maintain Application Besides 5-axis machining and concentric clamping, the position flexible workholding system MC-P Balance offers the solution for individual or series clamping of bars, rails, profiles, guide rails or housings. The compensating function avoids tensioning and deformation on the workpiece. Also workpieces that are fixed by internal contours or positioning elements can be clamped concentrically. For this purpose, customer-specific dowel holes or tapped holes can be provided in the guide bars of the MC-P Balance in which the workpiece supports or stops can be fixed. Accessories ••Clamping jaws and jaw inserts, accessories for mounting, positioning and operation see data sheet WS 5.450Z ••Rapid change block Quintus see data sheet WS 5.6150 Application example Description Workholding systems of the MC-P Z Balance series excel by a very compact design and their patented segment design. Due to the position flexible function, deformation of the workpiece during clamping can be avoided. The patented segment design ensures a high degree of precision and stability. The guiding clearance is reduced to nearly zero. All essential components are made of hardened steel. The workholding systems MC-P 100/125 Z Balance are already prepared for the use on zero point clamping systems. For this purpose, there are location threads for retractable nipples at the bottom side of the housing. For workholding systems MC-P Z Balance a wide range of clamping jaws is available (see data sheet WS 5.450Z). Technical data position flexible mechanically with a torque wrench Compensation stroke: ± 2 mm Clamping principle: Operation: MC-P 60 ZB Jaw width: Clamping force*: Clamping stroke: Max. jaw opening: MC-P 100 ZB Jaw width: Clamping force*: Clamping stroke: Max. jaw opening: MC-P 125 ZB Jaw width: Clamping force*: Clamping stroke: Max. jaw opening: Function The workholding systems MC-P Z Balance have a floating clamping point (with released locking). After operation of the clamping spindle, first the two clamping slides concentrically approach a location-fixed workpiece position. When both clamping jaws are in contact with the workpiece, the desired clamping force is applied by means of a torque wrench. Until this moment the clamping point is still floating. If the desired clamping force is reached, the clamping point which was floating up to this moment will be safely fixed by the locking spindle. Customised versions The adaptation of the clamping point to the loMC-P Z Balance workholding systems can cation-fixed workpiece position will prevent a also be delivered as customised versions. For deformation of the workpiece example with other lengths or with individual mounting holes. Clamping spindle Please contact us. Consultation Our experts will be pleased to advise you also on site, and work with you to find the optimum clamping solution. Extensive information such as drawings and CAD models are available on request. Locking spindle *Important note The specified clamping forces apply to a clamping height (n) of 15 mm. For higher clamping heights, the clamping f orces are reduced. Clamping of aluminium bars with workholding system MC-P 100 Z Balance. ROEMHELD · 927 Horan Drive, Fenton, MO 63026 · Phone: (314) 386-8022 · Fax: (314) 386-80

Technical data Dimensions MC-P 60 ZB View from below Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4583 6901) S SW 12 MC-P 100 ZB Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4585 6901) d1: ocation hole for retractable nipple L of a zero point clamping system MC-P 125 ZB Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4586 6901) S S1 d1: ocation hole for retractable nipple L of a zero point clamping system position flexible Clamping principle position flexible position flexible mechanical Repetitive clamping accuracy** Stroke, position flexible g on both...