WS 5.4502
4Pages

WS 5.4502 Workholding Systems MC-P Z concentric clamping, mechanically or hydraulically operated jaw widths 40, 60, 100 and 125 mm Advantages ● Patented segment design ● Compact design ● High precision and accuracy of the manufactured workpieces by high rigidity ● High zero-point stability ● Sturdy design and good swarf protection ● Large jaw openings ● Extensive range of jaws ● Clamping of raw and finished parts without retrofitting ● Easy to maintain Application The workholding systems MC-P  are espeZ cially advantageous for 5-axis machining. The compact design allows a good accessibility of the tools to the workpiece. Collision-free tool paths and a 5-sided workpiece machining can be achieved with short standard tools. Due to the good swarf protection, workholding systems MC-P Z are particularly suitable for the use in pallet systems. The high force and stability obviate the need for pre-stamping of the workpieces. Accessories • Clamping jaws and jaw inserts, accessories for mounting, positioning and operation see data sheet WS 5.450Z • Rapid change block Quintus see data sheet WS 5.6150 • Hydraulic pressure generators on request Description Workholding systems of the MC-P Z series excel by a very compact design and their patented segment design. Thanks to the adjusting spindle arranged in the upper part of the housing, deformation in the base during clamping is educed to a minr imum. Thus, a high rigidity of the workholding system is obtained. The patented segment design ensures a high degree of precision and stability. The guiding clearance is reduced to nearly zero. All essential components are made of hardened steel. The workholding systems MC-P 100 Z / 125 Z are already prepared for the use on zero point clamping systems. For this purpose, there are location threads for retractable nipples at the bottom side of the housing. For workholding systems MC-P Z, a wide range of clamping jaws is available (see data sheet WS 5.450Z). Technical data Clamping principle: Operation: MC-P 40 Z Jaw width: Clamping force*: Clamping stroke: Max. jaw opening: concentric clamping mechanically with a torque wrench hydraulically with a power unit MC-P 60 Z and ZH Jaw width: 60 mm Mechanical clamping force*: 15 kN at 60 Nm  Hydraulic clamping force*: 10 kN at 320 bar Clamping stroke: 30 mm 6 – 150 mm Max. jaw opening: MC-P 100 Z and ZH Jaw width: 100 mm Mechanical clamping force*: 25 kN at 90 Nm Hydraulic clamping force*: 20 kN at 270 bar Clamping stroke: 50 mm Max. jaw opening: 6 – 204 mm MC-P 125 Z and ZH Jaw width: 125 mm Mechanical clamping force*: 40 kN at 180 Nm  Hydraulic clamping force*: 35 kN at 270 bar Clamping stroke: 101 mm Max. jaw opening: 6 – 400 mm MC-P 125 Z Compact Jaw width: Clamping force*: Clamping stroke: Max. jaw opening: Consultation Our experts will be pleased to advise you also on site, and work with you to find the optimum clamping solution. Extensive information such as drawings and CAD models are available on request. Application example Workholding system MC-P Z with workpiece-specific base jaw and form jaw used on a 5-axis machining centre. Versions MC-P Z mechanically operated In the mechanically-operated version, the clamping force is built up with a threaded spindle. When operating, both clamping slides move mechanically linked to the centre of the clamping system. A torque wrench is used for exact and reproCustomised versions MC-P workholding systems can also be deliv- ducible clamping force adjustment. ered as customised versions. For example with other lengths, height or with individual mount- MC-P ZH hydraulically operated In the hydraulically-operated version, the ing holes. clamping force is built up by an externally genPlease contact us. erated hydraulic pressure. When pressurising, both clamping slides move mechanically linked *Important note The specified clamping forces apply to a to the centre of the clamping system. During unclamping, the clamping slides return hydrauclamping height (n) of 15 mm. For higher clamping heights, the clamping lically to the position that had been set with adjusting screws for stroke limitation. Thus, a furf orces are reduced. ther unnecessary wide opening of the clamping system is avoided. The clamping force adjustment is made by the setting of the operating pressure. MC-P100 Z ROEMHELD · 927 Horan Drive, Fenton, MO 63026 · Phone: (314) 386-8022 · Fax: (314) 386-8034 · info@cl

Technical data • Dimensions mechanically operated • jaw widths 40, 60 and 100 mm View from below Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4581 6931) Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4583 6901) MC-P 100 Z Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4585 6901) d1: ocation hole for retractable nipple L of a zero point clamping system Series Clamping principle Operation Clamping force / torque [kN/Nm] Repetitive clamping accuracy [mm] S* [mm] S1* [mm] d1 [mm] d2 [mm] d3 [mm] g on both sides [mm] Weight without clamping jaws [kg] Part no....

Technical data • Dimensions mechanically operated • jaw width 125 mm MC-P 125 Z View from below Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4586 6901) S d1: ocation hole for retractable nipple L of a zero point clamping system MC-P 125 Z Compact Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4586 6901) d1: ocation hole for retractable nipple L of a zero point clamping system Clamping principle Clamping force / torque Repetitive clamping accuracy Weight without clamping jaws Part no. without clamping jaws * depending on the used clampi

Technical data • Dimensions hydraulically operated • jaw widths 60, 100 and 125 mm MC-P 60 ZH View from below S Stroke limitation Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4583 6901) Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4585 6901) d1: ocation hole for retractable nipple L of a zero point clamping system Stroke limitation MC-P 125 ZH Accessory: Clamping jaw (Fig. shows reversible step jaw 9 4586 6901) d1: ocation hole for retractable nipple L of a zero point clamping system Clamping principle Repetitive clamping accuracy Operation Clamping force /...