WS 5.3570 Workholding Systems PC clamping against the fixed jaw or concentric clamping, mechanically operated jaw width 80 mm, clamping force 20 kN Description PC clamping systems excel by a simple, compact design and a low price. They are particularly suitable for use in pallet magazines. PC clamping systems in all-steel design are supplied with clamping jaws and offer high precision and process safety. The clamping jaws equipped with grip texture offer a good retention force even with low clamping forces. For mounting, the bottom sides of the PC clamping systems are provided with 4 tapped holes M8 in a grid of 52 mm as well as with a tapped hole M10 for the location of a STARK Clamping system PC 80 Z – concentric retractable nipple (see accessory). clamping At the side of the base there are clamping grooves for fixation with clamping claws. Application The simple design of the PC clamping systems PC clamping systems are advantageously allows easy disassembly and thus easy cleanused for workpiece clamping of small and me- ing of the clamping systems. dium-sized batches. As well as in automated systems where workpiece pallet storage units are used at the ma- Consultation chine tool. Our experts will be pleased to advise you also on site, and work with you to find the optimum clamping solution. Accessory Extensive information such as drawings and (see page 3 and 4) CAD models are available on request. • Clamping jaws • Accessories for mounting, positioning and operation • Adaptor plates • Clamping claws • STARK retractable nipple Clamping: Operation: against fixed jaw or concentric clamping mechanical with torque wrench PC 80 Jaw width: Clamping force: Clamping stroke: 80 mm 20 kN at 60 Nm 50 mm (fixed jaw) 62 mm (concentric) Length of the base: 170 mm Height: 60 mm Versions Two different designs are available that differ in their clamping type and clamping stroke and thus in the opening (see page 2). PC 80 Clamping principle: clamping against the fixed jaw Clamping stroke: 50 mm Clamping system PC 80 – clamping against fixed jaw Technical data PC 80 Z Clamping principle: concentric clamping Clamping stroke: 62 mm Advantages ● Clamping against the fixed jaw or concentric clamping ● Compact design ● Simple low-cost clamping system ● Mounting holes as per customer's request are possible ● All steel design ● Standard design with step jaws ● Accessory top jaw ● Accessory adaptor plate ● Easy disassembly and cleaning Accessory rapid change block  Quintus 1 (see data sheet WS 5.6150) • for mounting of the PC clamping systems on the machine table • available with or without zero point clamping system ROEMHELD · 927 Horan Drive, Fenton, MO 63026 · Phone: (314) 386-8022 · Fax: (314) 386-8034 · [email protected]

Technical data Dimensions PC 80 Clamping against the fixed jaw View from below SW 14 PC 80 Z Concentric clamping View from below SW 12 Series Clamping principle Clamping force S 1) S1 1) S2 1) Weight with clamping jaws Part no. with clamping jaws 1) depending on the clamping jaw used, see accessory page 3 Actual issue see www.roemh

Accessories Clamping jaws Top jaws with grip Step jaws smooth, fix Type Step jaws smooth, movable 15

Accessories for mounting, positioning and operation Application examples Accessories for mounting, positioning and operation Adaptor plate including screws and positioning bolts Top side: 4 through holes in the grid of 52 mm Bottom side: 4 tapped holes M8 in the grid of 96 mm Top side prepared for the location of MC 60. Torque wrench Type Socket for torque wrench Retractable nipple M10 for Quintus 1 Mounting at the clamping system Clamping claws Set of 4 off including screws Allen wrench for clamping jaws and top jaws Part no. Application examples Clamping system PC 80 Z equipped with 4 off retractable...