WS 4.3301 Tower Workholding Systems TS clamping against the fixed jaw, mechanically operated jaw widths 100 and 125 mm, with 4 clamping sides Advantages ●●2 sizes for optimum design to the machining centre ●●Clamping of 4, 8 or 16 workpieces with standard jaws ●●Clamping of different workpiece d imensions also on one side ●●Purely mechanical build up of the clamping force ●●Easy and safe operation ●●Large jaw openings and high flexibility due to extensive range of clamping jaws ●●Highest stability by design as a monoblock ●●Optimum protection against contamination and wear through patented guidance and sealing ●●Process-safe application of clamping force, also when using grip jaws Description The tower workholding systems TS convince with their durability and precision. The patented guidance and sealing principle works without any delicate sheet metal covers or plastic wipers. The design as a monoblock, without interfaces to individually screwed workholding systems, stands for high stability and high Customised versions accuracy. The centrally arranged fixed jaw as An experienced team of designers is at your a central jaw is without load and thus absodisposal to solve your individual clamping task lutely zero point stable. The workpieces are positioned close to each other, thus reducing and to develop customised versions. the travel paths of the machining centre to a Please contact us. minimum. The purely mechanical operation enables clamping also with low and always Application example reproducible clamping forces. These characteristics turn the tower workholding systems TS into a flexible standard fixture for a wide variety of applications in modern production. Application TS tower workholding systems are used on horizontal machining centres, in vertical m achining in connection with 4th axis, but also on 5-axis machining centres. The applications range from manually equipped machines to pallet stations and fully automated systems. Technical data Clamping sides: Operation: Clamping: 4 - arrangement 4 x 90° mechanically with a torque wrench against central jaw or fixed jaw arranged on one side TS 100 Jaw width: 100 mm Clamping force: 25 kN at 55 Nm Max. jaw opening: 1 x 343 mm 2 x 156 mm TS 125 Jaw width: 125 mm Clamping force: 40 kN at 115 Nm Max. jaw opening: 1 x 476 mm 2 x 226 mm 4 x 108 mm Versions The optimum adaptation to the machining centre and the machining task is facilitated by 2 versions of the TS workholding systems. Version with 3rd-hand function The operation is made with only one spindle per clamping side. The upper and lower clamping jaw are operated together by means of a spindle and clamp against a fixed central jaw or a fixed jaw arranged on one side. The integrated 3rd-hand function enables to only hold the lower workpiece by operating the spindle. Only after the insertion of the second workpiece above and operating again the spindle, both workpieces are clamped as defined. Version Vector in 2 variants Variant 1: central jaw as fixed jaw Variant 2: 2 x fixed jaw The operation is made with two spindles per Handling systems can optionally be used for clamping side. The 3rd-hand function is omitoperation. They increase the user-friendliness ted. The Vector versions are particularly suitand improve the ergonomics. We are pleased able for clamping of high workpiece weights >  to offer you the right system for your machine (  15 kg). When used as double workholding system, the upper and lower clamping points on request. can be pressurised with different clamping forces. Consultation Extensive information such as drawings and CAD models are available on request. Our experts will be pleased to advise you also on site, and work with you to find the correct clamping solution. Accessories The extensive range of clamping jaws see data sheet 4.330Z. Tower workholding system TS 125 with 3rd-hand function ROEMHELD · 927 Horan Drive, Fenton, MO 63026 · Phone: (314) 386-8022 · Fax: (314) 386-8034 · [email protected] Actual issue see www.

Series Jaw width Clamping force Dimensions in mm * Tolerance ±0.01 mm ** Tolerance ±0.02 mm ***Tolerance ±0.03 mm Clamping jaws and the associated jaw openings see data sheet WS 4.330Z View from below Series Version Variant H [mm] Stroke [mm] h1 [mm] h2 [mm] h3 [mm] h4 [mm] Weight without clamping jaws [kg] Part no. without clamping jaws Actual issue see www.roemheld-usa.com

Series Jaw width Clamping force Clamping jaws and the associated jaw openings see data sheet WS 4.330Z * Tolerance ±0.01 mm ** Tolerance ±0.02 mm ***Tolerance ±0.03 mm View from below Series Version Variant H [mm] Stroke [mm] h1 [mm] h2 [mm] h3 [mm] h4 [mm] Weight without clamping jaws [kg] Part no. without clamping jaws Actual issue see www.roemheld-usa.com