WS 1.3080 Workholding Systems NC clamping against fixed jaw, hydraulically operated, single acting jaw widths 100, 125 and 160 mm Advantages ● Steel base resistant to deformation ● Hydraulic clamping force build-up ● Hardened and ground guideways ● Extensive range of jaws ● Easy clamping range adjustment by quick socket pin adjustment ● Minimum set-up times ● Tapped hole in the fixed jaw for workpiece stop ● Clamping edge for clamping claws ● Quick cleaning by simple removal of the slide ● Longitudinal and crosswise keyways 20 H7 for quick positioning in accordance with NC requirements ● Different overall lengths for optimum adaptation to the machine table and the machining centre Application The hydraulically-operated workholding systems NC are advantageously used in vertical machining for die, mould and fixture construction. Their hydraulic operation enables semi-automated use and application in series production. Accessories See data sheet WS 1.300Z • Top jaws • Clamping and quick-change jaws • Workpiece stops • Accessories for fixation Technical data Description The workholding systems of the series NC can be flexibly and quickly adapted to the most varied clamping ranges because of their socket pin adjustment. By means of the longitudinal and crosswise keyways 20 H7, the NC can be positioned quickly and in accordance with NC requirements. Step jaw inserts are available as accessories, to extend the clamping range. The workholding system can be easily and quickly cleaned by pulling out the socket pin and removing the clamping slide from the base. Thus cost intensive downtimes will be reduced. NC 160 H Jaw width: 160 mm Clamping force: 63 kN at 350 bar Clamping stroke: 7 mm Clamping principle: clamping against the fixed jaw hydraulic with Operation: hydraulic power unit NC 100 H Jaw width: 100 mm Clamping force: 25 kN at 350 bar Clamping stroke: 5 mm Length of the base: 380 and 540 mm Max. jaw opening: 390 and 550 mm NC 125 H Jaw width: 125 mm Clamping force: 40 kN at 350 bar Clamping stroke: 5 mm Length of the base: 430, 560 and 720 mm Max. jaw opening: 434, 565 and 724 mm Length of the base: 550 and 750 mm Max. jaw opening: 577 and 777 mm Consultation Our experts will be pleased to advise you also on site, and work with you to find the optimum clamping solution. Extensive information such as drawings and CAD models are available on request. Hydraulic power units and hydraulic pumps are available on request. Delivery • Standard jaws smooth/serrated • Crank handle for clamping range adjustment Application example ROEMHELD · 927 Horan Drive, Fenton, MO 63026 · Phone: (314) 386-8022 · Fax: (314) 386-8034 · [email protected]

Technical data • Dimensions NC 100 H NC 100 H Length of the base 380 mm Standard jaws smooth/serrated (included in the delivery) View from above 474 Accessory: Step jaw insert NC 100 H Length of the base 540 mm  Standard jaws smooth/serrated (included in the delivery) 634 Accessory: Step jaw insert * Tolerance ± 0.01 mm ** Tolerance ± 0.02 mm All dimensions in [mm] Clamping principle Clamping force/operating pressure Clamping stroke Clamping range S 1) Clamping range S1 1) 1) Weight with clamping jaws Part no. 1) with the clamping jaws shown. Further clamping jaws and accessories on data sheet...

Technical data • Dimensions NC 125 H NC 125 H Length of the base 430 mm Standard jaws smooth/serrated (included in the delivery) 534 View from above Accessory: Step jaw insert Standard jaws smooth/serrated (included in the delivery) 665 Accessory: Step jaw insert NC 125 H Length of the base 720 mm Standard jaws smooth/serrated (included in the delivery) Accessory: Step jaw insert  * Tolerance ± 0.01 mm ** Tolerance ± 0.02 mm All dimensions in [mm] Clamping principle Clamping force/operating pressure Clamping stroke Clamping range S 1) Clamping range S1 1) 1) Weight with clamping jaws Part no....

Technical data • Dimensions NC 160 H NC 160 H Length of the base 550 mm Standard jaws smooth/serrated (included in the delivery) View from above Accessory: Step jaw insert NC 160 H Length of the base 750 mm Standard jaws smooth/serrated (included in the delivery) Accessory: Step jaw insert * Tolerance ± 0.01 mm ** Tolerance ± 0.02 mm All dimensions in [mm] Clamping principle Operation Clamping force/operating pressure Clamping stroke Clamping range S 1) Clamping range S1 1) Weight with clamping jaws Part no. 1) with the clamping jaws shown. Further clamping jaws and accessories on data sheet...