WS 1.3070 Workholding Systems NC clamping against the fixed jaw, mechanically operated with hydraulic force transmission jaw widths 100, 125 and 160 mm Application Workholding systems NC are advantageously used in vertical machining for die, mould and fixture construction. Accessories See data sheet WS 1.300Z • Top jaws • Clamping and quick-change jaws • lamping force preselection C The clamping force preselection enables the force to be applied in 6 stages up to the maximum. • Angle drive An angle drive that can also be retrofitted facilitates the operation, e.g. in the case of longitudinal clamping on the machine table. • Workpiece stops • Accessories for fixation Delivery • Standard jaws smooth/serrated • Crank handle Application example Advantages ● Steel base resistant to deformation ● Hydraulic force transmission ● Hardened and ground guideways ● Extensive range of jaws ● Easy clamping range adjustment by quick socket pin adjustment ● Angle drive or clamping force preselection can be retrofitted (accessories) ● Optional clamping force display ● Minimum set-up times ● Tapped hole in the fixed jaw for workpiece stop ● Clamping edge for clamping claws ● Quick cleaning by simple removal of the slide ● Longitudinal and crosswise keyways 20 H7 for quick positioning in accordance with NC requirements ● Different overall lengths for optimum adaptation to the machine table and the interfering edges in the machining centre Technical data Clamping principle: clamping against the fixed jaw mechanical Operation: by crank handle with hydraulic force transmission NC 100 Jaw width: Clamping force: Lengths of the base: 380 and 540 mm Max. jaw opening: 386 and 546 mm NC 125 Jaw width: Clamping force: Lengths of the base: 430, 560 and 720 mm Max. jaw opening: 431, 561 and 721 mm NC 160 Jaw width: Clamping force: Lengths of the base: 550 and 750 mm Max. jaw opening: 573 and 773 mm Description The workholding systems of the series NC can be flexibly and quickly adapted to the most varied clamping ranges because of their socket pin adjustment. By means of the longitudinal and crosswise keyways 20 H7, the NC can be positioned quickly and in accordance with NC requirements Step jaw inserts are available as accessories, to extend the clamping range. The workholding system can be easily and quickly cleaned by pulling out the socket pin and removing the clamping slide from the base. Thus cost intensive downtimes will be reduced. Consultation Our experts will be pleased to advise you also on site, and work with you to find the optimum clamping solution. Extensive information such as drawings and CAD models are available on request. Version with clamping force display The version with clamping force display allows a continuous and precise clamping force application. This offers enormous advantages for roughing and finishing operations, for example. The high-precision reproducibility of the clamping forces guarantees a maximum possible repetitive accuracy of the clamping processes. Furthermore, the clamping force display ensures a high degree of safety even when using grip jaws due to the permanent clamping and system control. Application video Workholding systems NC 125 with clamping force display ROEMHELD · 927 Horan Drive, Fenton, MO 63026 · Phone: (314) 386-8022 · Fax: (314) 386-8034 · [email protected] Actual issue see ww

Technical data • Dimensions NC 100 NC 100 Length of the base 380 mm View from above Standard jaws smooth/serrated (included in the delivery) 466 S2 Accessory: Step jaw insert Option: Clamping force display NC 100 Length of the base 540 mm Standard jaws smooth/serrated (included in the delivery) 626 Accessory: Step jaw insert 540 Option: Clamping force display * Tolerance ± 0.01 mm ** Tolerance ± 0.02 mm All dimensions in [mm] Clamping principle Operation Clamping force  Clamping range S 1) Clamping range S1 1) Weight with clamping jaws Part no. with clamping force display with the clamping jaws...

Technical data • Dimensions NC 125 NC 125 Length of the base 430 mm View from above Standard jaws smooth/serrated (included in the delivery) 528 Accessory: Step jaw insert Option: Clamping force display NC 125 Length of the base 560 mm Standard jaws smooth/serrated (included in the delivery) 658 Accessory: Step jaw insert Option: Clamping force display NC 125 Length of the base 720 mm Standard jaws smooth/serrated (included in the delivery) Accessory: Step jaw insert 15* 720 Option: Clamping force display 132  * Tolerance ± 0.01 mm ** Tolerance ± 0.02 mm All dimensions in [mm] Clamping principle...

Technical data • Dimensions NC 160 NC 160 Length of the base 550 mm View from above  Standard jaws smooth/serrated (included in the delivery) 684 S2 Accessory: Step jaw insert Option: Clamping force display NC 160 Length of the base 750 mm Standard jaws smooth/serrated (included in the delivery) Accessory: Step jaw insert Option: Clamping force display * Tolerance ± 0.01 mm ** Tolerance ± 0.02 mm All dimensions in [mm] Operation Clamping force  Clamping range S 1) Clamping range S1 1) Clamping principle Part no. with clamping force display Weight with clamping jaws with the clamping jaws shown....