HILMA KNC
12Pages

Workholding Systems

Force transmission and lead screw encapsulated in the slide Reversible step jaws Universal use of nearly all new and existing HILMA additional jaws as Standard, QIS, etc. Clamping edge and Longitudinal and 20 H7 reference keyway crosswise keyways 20 H7 on the face for vertical clamping applications Clamping edge (universal type) for clamping claws Precision linear guide Rapid coarse adjustment of the desired clamping range using socket pins Your benefits at a glance: Highest precision Universal use High process safety Simple and quick cleaning Quick adjustment of the clamping range by...

KNC Universal horizontal arrangement with angle drive KNC Universal vertical arrangement with block jaws KNC Universal lateral arrangement with reversible step jaws Steel base resistant to deformation, an optimum fixation of the fixed jaw and the long inside linear guide ensure maximum precision. The use of nearly all known and already existing EL/NC clamping jaws as well as of the extensive range of KNC clamping jaws enables universal use. Thanks to the completely encapsulated force transmission and lead screw, maximum process safety is obtained. No disturbing accumulation of swarf. The...

Technical Data HILMA KNC  mechanical-hydraulic KNC machine vice mechanical-hydraulic for tool making, mould making, construction of jigs and fixtures and production The machine vice for exacting demands on clamping quality. The mechanical-hydraulic force transmission and the lead screw are integrated into the slide body and are fully encapsulated. Easy, user-friendly manual clamping using the crank handle. 6-stage clamping force selection and angle drive are available as optional extras which may be retrofitted. The steel base with minimum deformation equipped with hardened and ground...

Reversible step jaw (figure shows fixed jaw) h G2 for HILMA standard jaws 1st side with precise step accommodation, 2nd side with a hole pattern for HILMA QIS jaw system or for fastening quickly interchangeable precise step bars. for reversible step jaw and block jaw, hardened l Part no. Precise step h Part no. Precise step h1 9.3152.6916 9.3153.6916 9.3154.6916 Block jaw, hardened (figure shows fixed jaw) 1st side hard-metal coated, 2nd side ground to be smooth, with hole pattern matching the HILMA QIS jaw system and standard jaws hard-metal coating on one side b e G2 for HILMA standard...

Clamping jaw, extra high with jaw insert grip, various widths (figure shows fixed jaw) Use locking device! Whether for compensating for non-parallel clamping surfaces, powerful clamping in the case of small clamping edge or for providing different precise step accommodations: just change the bar to create a multitude of different jaw variants. Jaw insert standard: 1st side grip texture, 2nd side smooth for precise steps. Interchangeable inserts are easily changed and can be designed, with certain limits, individually. Insert reversible h Scale 1 mm for rough adjustment SlimFlex clamping jaw...

HILMA standard jaws Clamping jaw extra large We will be pleased to send more data as a PDF or CAD file. Please contact info@hilm

QIS base jaw with permanent magnets Mount magnetic base jaw Approach the QIS jaw in parallel and insert the jaw guided by a locating pin Jaw change in a few seconds: Push up the QIS jaw to the end of the slot and tilt We will be pleased to send more data as a PDF or CAD file. Please contact info@hilma.de

HILMA Accessories for regular checks of the clamping force of hydraulic and mechanical clamping systems. c Application example for precise alignment of the clamping device on the machine table the key blocks are inserted laterally. Part number for Table slot 2 off = 1 set a Set of clamping claws with screws h Socket head cap screw DIN 912 Precision workpiece stop pivoting, rapid fixation, adjustment in 2 levels Angle drive without locking device, for subsequent fitting Lock optional Locking device for KNC angle drive for subsequent fitting Locking device Clamping force preselection incl....

Application examples clamping jaws Insert with QIS clamping jaws Clamping jaws with reduced width for narrow workpieces Soft clamping jaws with workpiece contours SlimFlex jaw for round workpieces SlimFlex jaw with movable inserts Pendulum jaw to compensate angular errors We will be pleased to send more data as a PDF or CAD file. Please contact info@hilma.de

Application examples

DS hydraulic with floating jaws NC with special clamping jaws ROEMHELD North America   927 Horan Dr. Fenton, MO 63026 Phone: (636) 386-8022 Fax: (636) 386-8034   E-mail: info@clrh.com Website: www.roemheld-usa.com © Hilma-Römheld GmbH · Subject to modifications NC with clamping force d