Workholding Systems

By a simple jaw change it is possible to insert 1 to  4 workpieces (DS 125) Tapped holes for workpiece stop One-sided lead screw operation with 3rd hand function for easy loading and unloading of the workpieces in a row Lead screw area encapsulated optimum protection against swarf Oil port G1/4 (DS 100/125) vertical (DS 125) axial Clamping edge for clamping claws, optionally internal fixing holes Dense workpiece a ccommodation due to fixed jaw in the centre Your benefits at a glance: Flexible use User friendly Fixing on the machine table High efficiency Operation 2 Hydraulic cylinder for the...

DS 125 mechanical with floating central jaws DS hydraulic arraged in a row for clamping of workpieces which require several clamping points. Can be automated. With a corresponding jaw selection 1 to 4 workpieces (DS 125), also of different dimensions, can be clamped. This allows a high flexibility in series production. The operation of all clamping points is made via one lead screw side. The 3rd hand function ensures a user-friendly and safe clamping of workpieces arranged in a row. By means of the insertion of fixing holes, the double clamping system DS can be directly clamped through the base...

HILMA DS 100  Technical Data Double clamping system DS 100, hydraulically or mechanically operated 80 Hydraulic version Lubricating nipple M6/10 deep 8x Mechanical version Weight without clamping jaws Planned variant for customerspecific mounting and fixation on request. Power stroke / oil volume for maximum clamping range Part no. 9.3791.5311 Bottom side hardened 100 18f7 Bottom side Positioning pin Ø 4 M6 hardened Description Guide plate Central step jaw 26 mm Central step jaw 86 mm Reversible step jaw Fixed step jaw Fixed step jaw The standard clamping jaws allow the accommodation of 1 to...

HILMA DS 125  Technical Data Double clamping system DS 125, overall length 430 mm, hydraulically or mechanically operated M12/17 deep 4x Hydraulic version Lubricating nipple 20H7 Mechanical version DS 125 overall length 430 mm Clamping force / torque Clamping force per slide Power stroke / oil volume Mounting hole Ø 6 E8 10 deep Locking screw 3rd hand Part no. Description 9.3791.6140 Guide plate 9.3791.6111 Central step jaw 22 mm 9.3791.6121 Central step jaw 82 mm 9.3791.6211 Reversible step jaw 9.3791.6341 Fixed step jaw 9.3791.6541 Floating central jaw 9.3791.6311 Fixed step jaw The standard...

Guide plate for maximum clamping range Part no. 9.3791.6311 x = 50 and 56 mm Part no. 9.3791.6541 for overall length 430 Bottom side hardened Bottom side hardened Standard clamping jaws, soft, for milling of workpiece contours, steps, stops, etc. Supplied including fixing screws. DS 125 standard jaws, case-hardened and ground with 8 mm steps (free space for tools and swarf). Supplied including fixing screws. x = 50 and 80 mm Part no. 9.3791.6511 for overall length 510 Adjustable step jaw insert without step jaw inserts Part no.9.3791.6170 Adjustable step jaw insert SlimFlex jaw system, case-hardened...

Application examples

NC with clamping force display NC with special clamping jaws ROEMHELD North America 927 Horan Dr. Fenton, MO 63026 Phone: (636) 386-8022 Fax: (636) 386-8034 E-mail: [email protected] Website: www.roemheld-usa.com © Hilma-Römheld GmbH · Subject to modifications