Workholding Systems for turning and milling centres

Your benefits at a glance: Lead screw and nut are completely encapsulated Jaw insert* for direct positioning of the workpiece on the face plate Sturdy lead screw running in an almost maintenance-free plain bearing Steel base (nitrided) Easy preadjustment using a scale 2 * Special accessory

For holding workpieces in milling and turning centres, HILMA box jaws are the first choice. This new development combines a number of striking advantages compared with the normal level of technology available in the market. The lead screw and the nut are fully encapsulated for enhancing process safety: This avoids the presence of swarf in the lead screw area and thus wear and subsequent failure of the box jaws. For a table diameter of approx. 1200 mm and above box jaws are the more economic alternative to jaw chucks. Please request further details without commitment!

Technical data and dimensions Box jaws series KK, mechanically operated, standard design Type KK 150-22 Part no. 9.2061.0101 Clamping force [kN/Nm] 30 / 150 Slot width [mm] 22 Slot spacing/ track [mm] 150 Max. stroke [mm] 70 Clamping jaw, modular displacement [mm] 1 x 60 Width of cross bar [mm] 30 x 7,5 Wrench size SW 14 (hex. socket) Length x width [mm] 255 x 190 Height H 1 [mm] 110 Height H 2 [mm] 193 Other versions on request ROEMHELD North America 927 Horan Dr. Fenton, MO 63026 Phone: (636) 386-8022 Fax: (636) 386-8034 E-mail: [email protected] Website: www.roemheld-usa.com © Hilma-Römheld GmbH...