Zero point clamping system SPEEDY hydratec
24Pages

{{requestButtons}}

Catalog excerpts

Zero point clamping system SPEEDY hydratec - 1

Zero point clamping system SPEEDY hydratec 1

Open the catalog to page 1
Zero point clamping system SPEEDY hydratec - 3

n Using the zero point clamping system SPEEDY hydratec you will increase your production times to a maximum. n This clamping element stands for the highest requirements in automation. automated production Maximum flexibility n SPEEDY hydratec has a uniform interface that can be arranged variably. n SPEEDY hydratec features compact design, easy assembly, as well as high, fast changing cycles. Maximum safety n Insensitive to soiling due to central locking and effective clearing device. n Highest possible safety in automation due to integrated polling features (clamped, released, mount...

Open the catalog to page 3
Zero point clamping system SPEEDY hydratec - 4

Zero point clamping system STARK clamping systems overview Differentiation is by the method of actuation and varying size of the retractable nipples: SPEEDY classic – clamp mechanically / release hydraulically Most complete and versatile zero point clamping system. n Four sizes and numerous variants SPEEDY metec – clamp / release mechanically Robust, mechanical zero point clamping system for easy, low-cost solutions. n Three sizes SPEEDY airtec – clamp mech. / release pneum. Pneumatic zero point clamping system. n One size and numerous variants SPEEDY hydratec – clamp / release...

Open the catalog to page 4
Zero point clamping system SPEEDY hydratec - 5

ROEMHELD 4-4- HILMA - STARK SPEEDY hydratec 1 Order no. Mechanical insertion force tester 504 003 3.2 For data sheets and 3D data see www.stark-inc.com STARK Spannsysteme GmbH Tel.: +43 5522 37 400-0 E-mail: info@stark-inc.com Subject to modifications

Open the catalog to page 5
Zero point clamping system SPEEDY hydratec - 6

ROEMHELD 4‘4‘ HILMA - STARK Zero point clamping system hJTrff^CLTechnical data -Transparency from the start SPEEDY hydratec order no. Catalogue page Flush Mount module Bearing surface Raised supports Release check (2 bar) Clamping check (2 bar) Element with zero point Element with equaliser Element without centring Maintenance interval Cycles Extraction force at max. release pressure [ N ] Extraction, retraction distance ** [ mm ] Lateral forces max. permitted [ N ] Max. tilting torque (diagonally across supp.) [ Nm ] Oil volume for clamping and releasing [ cm3 ] Air volume -...

Open the catalog to page 6
Zero point clamping system SPEEDY hydratec - 7

Zero point clamping system Technical data – Terminology – definitions 1 Clamping force Clamping force refers to the load up to which the zero point is guaranteed. The clamping force stated must not be exceeded. Due to the adjustable clamping force, there is a maximum, at the maximum clamping pressure (see table below). Retention force refers to the max. overload up to which the nipple will continue to be retained, but the zero point has already been left (designed for M10 screw). The loading device must, during manual and automated loading, yield without the application of force....

Open the catalog to page 7
Zero point clamping system SPEEDY hydratec - 8

Zero point clamping system Technical data – Tilting torque example calculation Profit from our specialist competence Example: Fast closing clamp plate 4x SPEEDY classic 1 with 200 x 200 spacing and max. feed force of 7 kN with distance of 400 mm. Question: Due to the predominance of roughing work, the system is to be checked for double safety. Are the insertion force, number of fast closing clamps and the selected spacing right for this application? L2 L1 SPEEDY hydratec Machine table MV : Moment from feed force ME : Moment from insertion force L1 + L2 = 0,60 m + 0,200 m = 0,260 m ME = 2 x...

Open the catalog to page 8
Zero point clamping system SPEEDY hydratec - 9

ROEMHELD 4-4- HILMA - STARK Zero point clamping system h^aEcCEFunction description SPEEDY hydratec -Positioning and clamping in one function Ton an as com hydratec released: The highly effective clearing device and the central locking keep the bearing surface and the positioning hole clean. Feed pallet: The central locking is pushed down out of the way and the pallet is positioned at a distance of exactly 4.5 mm * in the correct position for the clamping process. If couplings are used, these are then also in the required axial position for exact engagement. * Other distances possible as an...

Open the catalog to page 9
Zero point clamping system SPEEDY hydratec - 10

ROEMHELD 4‘4‘ HILMA - STARK Zero point clamping system hJTrff^CLSTANDARD • Module • Bearing surface • Clearing device • Pneumatic mount control • Central locking Characteristics: Flush Mount fast closing clamp module made of high quality tool steel. Due to the compact dimensions, requires little space. Can be installed as a module, in plates or directly in the machine table. Double action fast closing clamp. Is clamped and released hydraulically. Due to its short cycle times, particularly suitable for automation. Positioning is via the precision bore (A) and via the bearing surface...

Open the catalog to page 10
Zero point clamping system SPEEDY hydratec - 11

ROEMHELD 4-4- HILMA - STARK Zero point clamping system h^aEcCE STANDARD • Module • Bearing ring • Clearing device • Pneumatic mount control • Pneumatic release check • Central locking Characteristics: Flush Mount fast closing clamp module made of high quality tool steel. Due to the compact dimensions, requires little space. Can be installed as a module, in plates or directly in the machine table. Double action fast closing clamp. Is clamped and released hydraulically. Due to its short cycle times, particularly suitable for automation. Positioning is via the precision bore (A) and via the...

Open the catalog to page 11
Zero point clamping system SPEEDY hydratec - 12

ROEMHELD 4‘4‘ HILMA - STARK Zero point clamping system hJTrff^CL STANDARD • Module • Raised supports with clearing nozzles • Clearing device • Pneumatic mount control • Pneumatic clamping check • Pneumatic release check • Central locking Characteristics: Flush Mount fast closing clamp module made of high quality tool steel. Due to the compact dimensions, requires little space. Can be installed as a module, in plates or directly in the machine table. Double action fast closing clamp. Is clamped and released hydraulically. Due to its short cycle times, particularly suitable for...

Open the catalog to page 12
Zero point clamping system SPEEDY hydratec - 13

Characteristics: Every application has different requirements on function and safety. The hydraulic and pneumatic operation and monitoring can be combined in one unit. An experienced engineer from STARK will be available to assist you during design. Options: With integrated hydraulic and electrical control via remote control with 7m cable (with Harting connector). Function triggered using control panel with illuminated pushbuttons. Including hydraulic oil HLP32 and electrical connection with 10m long cable and CEE 5/16 connector. PLC controller for release check, clamping check, system...

Open the catalog to page 13

All Römheld GmbH Friedrichshütte catalogs and technical brochures

  1. Rotor locks

    6 Pages