Program summary SWING CLAMPS
8Pages

{{requestButtons}}

Catalog excerpts

Program summary SWING CLAMPS - 1

HILMA - STARK Program Summary

Open the catalog to page 1
Program summary SWING CLAMPS - 2

HILMA - STARK Program Summary SWING CLAMPS High pressure Body type Bottom flange Type Data sheet • double acting • single acting Hydraulic connection Overload protection Reinforced or sturdy swing mechanism Position monitoring Clamping arm seat Seals / wipers Metallic wiper Max. operating temperature Piston rod diameter Piston diameter Max. clamping force (1) Clamping stroke for double-acting version Max. flow rate for clamping Clamping time reference value for the shortest stroke pipe thread drilled channels • O pendulum eye / fork head NBR / FKM O +80 °C O option - not available * only...

Open the catalog to page 2
Program summary SWING CLAMPS - 3

overload protection pendulum eye / fork head without swing stroke pipe thread drilled channels pendulum eye / fork head NBR / FKM

Open the catalog to page 3
Program summary SWING CLAMPS - 4

Threaded-body type Cartridge type drilled channels drilled channels

Open the catalog to page 4
Program summary SWING CLAMPS - 5

overload protection B 1.881 B 1.881 pipe thread pipe thread or drilled channels pipe thread or drilled channels gg-. ROEMHELDHILMA - STARK Electric swing clamps swing clamps with DC motor, gear and threaded spindle nominal voltage: 24 VDC with electrical position monitoring and extended self-monitoring with error messages Camping force control Further swing angles are available on request (min. 45°).

Open the catalog to page 5
Program summary SWING CLAMPS - 6

Important technical information Application Hydraulic swing clamps are used for clamping of workpieces when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading. Accessory - clamping arm As accessories different clamping arms are available. Material 42CrMo4 • One-sided clamping arm with contact bolt Accessory - position monitoring Position monitoring is available as an accessory for some swing clamp types. The positions "Unclamped" and "Clamped" are acknowledged. Accessory Clamping arm Option Metallic wiper...

Open the catalog to page 6
Program summary SWING CLAMPS - 7

Important technical information Materials Piston material high alloy steel, nitrated or chromium-plated Body material high alloy steel, nitrated By nitrating piston and body, wear is reduced and protection against corrosion increased. Sealing materials Series: • NBR = nitrile butadiene rubber Trade name e.g.: Perbunan On request: • FKM = flouro rubber Trade name e.g.: VITON® Maximum operating pressure For one-sided clamping arms the maximum admissible operating pressure depends on the length of the clamping arm. These values are indicated in the diagrams on the corresponding data...

Open the catalog to page 7
Program summary SWING CLAMPS - 8

gg., ROEMHELD HILMA - STARK E-mail: info@roemheld.de www.roemheld-group.com Workholding systems and standard fixtures for metal cutting and non-cutting manufacturing Magnetic clamping systems Intelligent zero point clamping systems Hilma-Romheld GmbH SchutzenstraBe 74 57271 Hilchenbach Germany Tel.: +49 2733/281-0 E-mail: info@hilma.de www.roemheld-group.com Romheld Rivi GmbH SchutzenstraBe 74 57271 Hilchenbach Germany Tel.: +49 2733/281-100 E-mail: info@roemheld-rivi.de www.roemheld-group.com Stark Spannsysteme GmbH Romergrund 14 6830 Rankweil Austria Tel.: +43 5522/374 00-0...

Open the catalog to page 8

All Römheld GmbH Friedrichshütte catalogs and technical brochures

  1. Rotor locks

    6 Pages