PROGRAM SUMMARY Magnetic Clamping Sytems M-TECS
6Pages

Program Summary Rivi Magnetics® Magnetic Clamping Sytems M-TECS Plastics processing M-TECS P For thermoplastics up to 120° C Rubber processing M-TECS R For elastomer and thermosetting plastics up to 240°C

Good start – quick change Gain time with M-TECS – Low downtimes. High productivity. Low set-up cost. Small batches entail frequent mould change. Whenever only a few parts are required, Rivi Magnetics magnetic clamping systems M-TECS provide a clear competitive advantage: ■ low downtimes ■ low set-up costs ■ increased productivity Ideal for processing thermoplastics, thermosetting plastics, or rubber M-TECS is a magnetic clamping technology that sets standards for magnetic quickchange systems for the plastics processing industry. M-TECS P and M-TECS R operate with electro-permanent magnets....

M-TECS P The quick-change system for thermoplastics Temperature stable up to 120 °C Rivi Magnetics magnetic clamping systems provide evident benefits: injection moulds, even if not standardized, can be easily and quickly changed without the need for mould change. As a result of a clamping force that is evenly distributed all over the clamping surface, moulds’ wear is considerably reduced which means lower mould maintenance costs. With no moving parts, the system itself is basically maintenance-free. It is suitable for retrofitting on existing injection moulding machines or incorporating...

M-TECS R The quick-change system for elastomer and thermosetting plastics Temperature resistant up to 240 °C M-TECS R opens up new paths for the rubber and the thermosetting plastics processing industries. With no downtime or waiting time to cool down or heat up moulds, changing times can sometimes be cut by hours. With magnetic clamping technology, moulds can be changed even when they are hot, as the operator will not make contact with them at all. This is both convenient and safe. The magnetic plates have a complete metal surface. With no T-slot between the heating and the mould,...

With optimum starting conditions, you’ll make the race M-TECS magnetic plates ensure maximum power concentration. If a mould does not completely cover the magnetic plate surface, forces are directed to the clamping area, precisely where they are needed. This gives you maximum safety – a clear benefit, particularly for small or medium moulds. Also, large moulds are safely kept in place with the highest clamping forces. For all types of machines, mould change takes just a matter of minutes. The solid webs between the poles give the structure high rigidity. This has a positive effect on the...

Die clamping and changing systems from Hilma-Römheld Couplings and multi-couplings Ball and roller bars, consoles and accessories Please contact us if you would like further information, such as technical data sheets or spreadsheets for ROI calculation. We will be pleased to provide sample calculations of investment cost and amortization times tailored to your application. Hilma-Römheld GmbH Auf der Landeskrone 2 57234 Wilnsdorf-Wilden, Germany Tel.: + 49 2739 4037-0 E-Mail: info@hilma.de www.roemheld.de Magnetic Clamping Systems Rivi Magnetics S.r.l. Via Pordoi, 19 41049 Sassuolo (MO),...