Program summary hinge clamps and clamps
8Pages

{{requestButtons}}

Catalog excerpts

Program summary hinge clamps and clamps - 1

HILMA - STARK Hinge clamps with flat clamping lever Program summary Mini hinge clamps Hinge clamps Compact clamps Position flexible clamps Flat clamps Block clamps Slide pivot clamps

Open the catalog to page 1
Program summary hinge clamps and clamps - 2

Application Hydraulic hinge clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading. Function The hinge clamp is a double-acting hydraulic cylinder with integrated clamping lever. When pressurising the element, the piston moves upwards and swivels the clamping lever over a hinge forwards and at the same time downwards onto the workpiece. The piston force is deviated by 180° and, depending on the lever length, the force is available as clamping force. Workpiece clamping...

Open the catalog to page 2
Program summary hinge clamps and clamps - 3

HILMA - STARK Mini hinge clamps mini compact clamps cartridge type 200 bar Data sheet Hydraulic connection drilled channels Functioning Special features Position monitoring Number of sizes Max. clamping force Clamping range Max. operating pressure Min. operating pressure Clamping lever variants Seals / wipers Metallic wiper edge Max. operating temperature Max. flow rate clamping Clamping without side loads Mounting position double acting - minimum dimensions - body partially recessible double acting - minimum dimensions - body partially recessible 1 2.3 kN ±1.5 mm 70 bar 10 bar with swivel...

Open the catalog to page 3
Program summary hinge clamps and clamps - 4

Hinge clamps cartridge type and flange type 250 bar pipe thread pipe thread or drilled channels pipe thread or drilled channels double acting double acting double acting ■ clamping possible without side loads - 4 sizes ■ interchangeable contact bolts - built-in flow control valve clamping possible without side loads - 5 sizes - 3 clamping directions selectable Option: inductive or pneumatic position Option: inductive or pneumatic position monitoring by extended piston rod monitoring by extended piston rod

Open the catalog to page 4
Program summary hinge clamps and clamps - 5

Hinge clamps with flat clamping lever cartridge type 250 bar drilled channels drilled channels pipe thread or drilled channels double acting double acting single acting or double acting double acting – minimum dimensions – clamping possible without side loads – minimum dimensions – clamping possible without side loads – minimum dimensions – particularly flat clamping lever can be swivelled into small recesses – clamping unit adapts itself position flexible to the height – workpiece support point adjustable Option: pneumatic clamping monitoring or unclamping monitoring Option: pneumatic...

Open the catalog to page 5
Program summary hinge clamps and clamps - 6

Flat clamps Block clamps Slide pivot clamps pipe thread or drilled channels pipe thread or drilled channels pipe thread or drilled channels B 1.8242 pipe thread or drilled channels double acting - high protection against swarf and welding spatter - clamping lever retracts completely Accessory: inductive control of the unclamping position and the clamping position 2 12.0 ... 20.5 kN 9.0 ... 16.0 mm 500 bar 10 bar dome-head clamping lever with swivel ball NBR 80 °C 10 ... 20 cm3/s possible any double acting - versions with / without self-locking ■ clamping direction 0 to 360° adjustable...

Open the catalog to page 6
Program summary hinge clamps and clamps - 7

Important technical information Accessory: position monitorings Two series of the hinge clamps are optionally supplied with an extended piston rod (switch rod). A pneumatic or inductive position monitoring can be fixed at the bottom of the housing. Both versions have the following control functions: 1. Unclamped Piston retracted and clamping lever in off-position. 2. Clamped Piston extended and clamping lever in clamping position. For each control function, a pneumatic line or an electrical line has to be provided at the clamping fixture. The double-acting hinge clamps with flat clamping...

Open the catalog to page 7
Program summary hinge clamps and clamps - 8

HILMA - STARK Program summary Hinge clamps 1-18 E • Subject to modifications Compact clamp B 1.827 with pneumatic clamping monitoring Mini compact clamp B 1.8271 with minimum dimensions and a unique fixing principle https://www.youtube.com/watch?v=sDu1iO9aw18 Position flexible clamp B 1.733 for supporting and clamping of unstable workpiece sections https://www.youtube.com/watch?v=GZTQydVFjZs Email: info@roemheld.de www.roemheld-group.com

Open the catalog to page 8

All Römheld GmbH Friedrichshütte catalogs and technical brochures

  1. Rotor locks

    6 Pages