Machine Vice with clamping force indication in kN
4Pages

{{requestButtons}}

Catalog excerpts

Machine Vice with clamping force indication in kN - 1

Machine Vice with clamping force indication in kN

Open the catalog to page 1
Machine Vice with clamping force indication in kN - 2

Pressure gauge for enhanced precision CLAMPING TECHNOLOGY - Atlas Copco was having problems due to tool breaking and machine downtime. Solution: A HILMA machine vice with a pressure gauge that allows parts to be safely clamped ready for machining. Problems first arose in 2011 after a change of metal cutting machines. Michael Beer, equipment engineer for fixture construction at Atlas Copco Construction Tools Essen: "With the old equipment, parts were machined on two sides at a time, but the new system only machined them on one side. As pressure came only from one side, the workpiece...

Open the catalog to page 2
Machine Vice with clamping force indication in kN - 3

Benefits at a glance • Constant process control • No workpiece deformation, thanks to sensitive clamping • Immediate identification of incorrect clamping • Higher clamping quality because of reduced clamping force • No option for manual clamping force • Ideal for roughing and finishing applications The success of HILMA machine vices with a pressure gauge was quickly apparent: Since these solutions have been in place, no tools have broken. Michael Beer is enthusiastic: "If I had known before that VL 160 with a pressure gauge costs just 200 Euros or so more but offers such a great value for...

Open the catalog to page 3
Machine Vice with clamping force indication in kN - 4

For tool, mould and fixture construction and production The completely revised power transmission requires minimal force to be applied to the crank. An angle drive (optional extra) facilitates operation, for instance for lengthwise clamping on the machine bed. Optional clamping power preselection (available for retrofit) allows the clamping power to be limited in 6 steps. It offers special benefits thanks to precise positioning on all grooved tables and optimal utilization of machine travel, as well as an increase in the clamping range using step jaw inserts. Optional Step jaw inserts Scope...

Open the catalog to page 4

All Römheld GmbH Friedrichshütte catalogs and technical brochures

  1. Rotor locks

    6 Pages