DISC BRAKES TYPE RST - 32 Pages

Add to MyDirectIndustry favorites
DISC BRAKES TYPE RST

Catalog excerpts

Only Quality is economical in the long run Römer Fördertechnik Your german component manufacturer. Typ RST Typ Caliper SCFH (Sicherheitsscheibenbremse) Type RST Type Caliper SCFH (Safety disc brake)

 Open the catalog to page 1

RFT ROMER Fordertechnik GmbH NielandstraBe 53 * D-58300 Wetter eMail:    info@roemer-foerdertechnik.de Internet: www.roemer-foerdertechnik.de

 Open the catalog to page 2

Left hand version (L)Right hand version (R) Lifting gap at each brake shoe 1,25 mm 1) The different operation factors such as sliding speed, surface pressure, thermal load, condition of the sliding surfaces, brake drum material and environmental conditions can influence the friction coefficient p. They should thus be taken into consideration in addition to the guiding rules of DIN 15434 when dimensioning the brake. The data for braking torque are valid for dynamical braking at normal operating temperatures and sliding speeds up to 25 m/s or max. 60 m/s for sinter linings. The operating...

 Open the catalog to page 3

Disc Brake RST-1 electro-hydraulically actuated Technical Data Left hand version (L)    Right hand version (R)    Lifting gap at each brake shoe 1,25 mm Dimensions in mm 1) The different operation factors such as sliding speed, surface pressure, thermal load, condition of the sliding surfaces, brake drum material and environmental conditions can influence the friction coefficient p. They should thus be taken into. consideration in addition to the guiding rules of DIN 15434 when dimensioning the brake. The data for braking torque are valid for dynamical braking at normal operating...

 Open the catalog to page 4

^RFT ROMER Fordertechnik GmbH NielandstraGe 53 * D-58300 Wetter Disc Brake RST-2 electro-hydraulically actuated Technical Data    Page 4 of 6 Left hand version (L) Right hand version (R)    Lifting gap at each brake shoe 1,5 mm 1) The different operation factors such as sliding speed, surface pressure, thermal load, condition of the sliding surfaces, brake drum material and environmental conditions can influence the friction coefficient p. They should thus be taken into. consideration in addition to the guiding rules of DIN 15434 when dimensioning the brake. The data for braking torque are...

 Open the catalog to page 5

Disc Brake RST-3 electro-hydraulically actuated Technical Data RÖMER Fördertechnik GmbH Nielandstraße 53 * D-58300 Wetter Left hand version (L) Right hand version (R) Lifting gap at each brake shoe 1,5 mm Dimensions in mm Brake lining Weight AB [cm²] [kg] 2) Data in ( ) width of brake disc B1 = 40 mm 1) The different operation factors such as sliding speed, surface pressure, thermal load, condition of the sliding surfaces, brake drum material and environmental conditions can influence the friction coefficient µ. They should thus be taken into. consideration in addition to the guiding rules...

 Open the catalog to page 6

ROMER Fordertechnik GmbH NielandstraUe 53 * D-58300 Wetter The drawing shows the brake in right hand design R. The left hand design L is mirrored to the drawing. Lifting gap at each brake shoe 1,25 mm 1) The different operation factors such as sliding speed, surface pressure, thermal load, condition of the sliding surfaces, brake drum material and environmental conditions can influence the friction coefficient p. They should thus be taken into consideration in addition to the guiding rules of DIN 15434 when dimensioning the brake. The data for braking torque are valid for dynamical braking...

 Open the catalog to page 7

Only Quality is economical in the long run Römer Fördertechnik Your german component manufacturer. Typ Caliper SCFH (Sicherheitsscheibenbremse) Type Caliper SCFH (Safety disc brake)

 Open the catalog to page 8

Disc Brake Caliper SCFH Direct acting, hydraulic release. Page 1 of 4 Nielandstraße 53 * D-58300 Wetter Operating Principle • Spring applied braking force Hydraulic release Fail Safe (if power fails the brake applies) Direct acting without linkages Notable Features • High braking torque, direction of rotation independent Supplied ready assembled, with pre-tensioned braking springs Two identical halves, and can be mounted in any position Manual adjustment for brake wear. Air-gap adjustable in the range of 1 to 3 mm standard low wear sintered pads with µ = 0,4 Encapsulated hydraulic system....

 Open the catalog to page 9

Direct acting, hydraulic release. Page 2 of 4 Options and Accessories: • Monitoring switches to indicate brake open, brake closed, brake lining wear • Manual release, using a hand pump on the Hydraulic Power Pack • Hydraulic Power Pack, which can also be configured to operate multiple calipers • Special versions for very high or very low temperatures • Hydraulic systems with hardly inflammable or biodegradable hydraulic fluids • Brake discs either with hub or flange mounting 1) Various factors can affect the friction coefficient |j, including surface speed, contact pressure, thermal...

 Open the catalog to page 10

Determining the Brake Torque: The effective brake torque of a complete brake caliper is calculated using the following formula TBr = M • Fan • D1 The effective diameter D1 can be found using the formula below on this page. Alternatively, the effective braking torque can be taken from the displayed diagram. Combinations of multiple calipers are possible to get a wide range of contact force. 4 x SCFH - 4 => 1600 kN contact force for s = 2 mm airgap 1 x SCFH-1-80    => 77 kN Special Design and combinations on request! Dimensions dependent on the brake disc: Brake disc outer diameter D2, and...

 Open the catalog to page 11

Disc Brake Caliper SCFH Direct acting, hydraulic release. Page 4 of 4 Nielandstraße 53 * D-58300 Wetter Mounting surface Dimensions in mm Technical modifications reserved! Mounting surface Mounting surface Brake disc eMail: info@roemer-foerdertechnik.de Internet: www.roemer-foerdertechnik.de Modifications reserved -

 Open the catalog to page 12

^RFI ROMER Fordertechnik GmbH NielandstraUe 53 • D-58300 Wetter Disk Brake Caliper SCFH Standard Hydraulic Power Unit for SCFH 1 - 4 Page 1 of 3General Information: The power unit can be used for operating multiple calipers SCFH. The clamping time is dependant on the length and the size of the tubes and hoses connecting the brakes to the hydraulic power unit and the lifting gap at each brake lining. In order to apply the brakes within a time of about 100 ms it is recommended not to exceed the following quantity of clamps per power unit. 1) Other voltages on request! eMail:...

 Open the catalog to page 13

All Römer Fördertechnik GmbH / RFT catalogs and technical brochures

  1. PUDZ III

    9 Pages

  2. HERKULES II

    4 Pages

  3. BAND BRAKES

    2 Pages

  4. IPS

    6 Pages