COMPLETE CATALOGUE "RAIL CLAMPS / STORM BRAKES"
22Pages

Only Quality is economical in the long run Römer Fördertechnik Your german component manufacturer. - für schienengebundene Anlagen / Krananlagen - bewegliche Hallendächer Manuell, elektrisch, hydraulisch, Federkraft-hydraulisch R a il C la mp s / S to rm Brakes - f o r ra il mo u n te d machines / Crane syst ems - f o r mo va b le ro o fs Manually, electrically, hydraulically, spring applied - hydraulical VZFH-HVZ opened VZFH-HVZ closed

Rail clamp / Storm brake systems For rail-bounded machines and movable roofs. Protect your system. German production! ▪ Manually closing and opening ▪ Lifting device for clamp shoes ▪ Restraining forces up to 100 kN per clamp ▪ Limit switches monitoring for clamp position ▪ Lateral compensation for rail misalignment ± 7 mm,       with floating housing ± 25 mm ▪ Guidance of floating housing either with rollers or by a hand     lever for the lateral positioning     (Positioning with hand lever: Area sideways the rails stays free) Type VZE ▪ Electrical closing and opening Actuated by an...

Comparison of Rail-Clamp Systems Page 1 of 1 RÖMER Fördertechnik GmbH Nielandstraße 53 * D-58300 Wetter Rail Clamp Systems VZE / VZM A special feature of rail clamp systems VZE / VZM is the vertical lifting of clamp levers with jaws after clamp opening in such manner that the clamp-shoes are more than 16 mm above top of rail. Therefore obstacles sideways the rails, e. g. ramps, can be overtravelled without problems, if the clamp system is not equipped with a floating housing (SG). The clamp system VZE / VZM mounted with a floating housing (SG) is able to compensate rail misalignment up to...

^RFT ROMER Fordertechnik GmbH NielandstraUe 53 * D-58300 Wetter Rail Clamp Type VZFH with Floating Guidance Type VHS _Page 1 of 2 Restraining Force and Dimensions Design. / Size Note: 1) Limiting size is valid for clamping jaw cassettes. Variation of standard dimension on request as special design. Operating Principle • Closing by spring force with toggle lever system - adjustable by throttle (time delay 15 - 25 s closing time) • Opening by hydraulic-cylinder, hydraulic-unit inclusive. An emergency hand-pump serves in case of need. • No loss of clamping force resulting from jaw wear within...

Rail Clamp Type VZFH with Floating Guidance Type VHS RÖMER Fördertechnik GmbH Nielandstraße 53 * D-58300 Wetter Floating Guidance Type VHS Track guiding rollers align the rail clamp carriage inside the clamp housing and compensate a rail displacement with vertical and horizontal movement capability if necessary. In doing so the carriage is guided by the additional vertical–horizontal-guidance VHS within the crane housing that is mounted to the crane. For that matter the carriage with the lever system could move only vertically and horizontally within defined limits of sizes for the...

Only Quality is economical in the long run Römer Fördertechnik Your german component manufacturer. S c hi e n e n za n g e / S tu rmsicher ung Typ VZFH-HVZ mit Hub- und Positionierungsfunktion Type VZFH-HVZ with lifting and positioning function

RFT ROMER FORDERTECHNIK Your german component manufacturer. Features | ■ Holding / Restraining forces up to 640 kN at q = 0,4 ■ With lifting and positioning function - vertical lifting - No contact to the rail during crane travel ■ No guide rollers for guiding the system on the rail = Extreme wear reduction! | ■ Lateral positioning of ± 25 mm during lowering ■ No crane travel speed limit due to rail clamp guiding ■ Especially suitable for transverse travels ■ No loss of restraining forces in case of wear (on clamp jaws) due to toggle lever transmission ■ Self-acting in case of power...

NEW GENERATION Rail clamps / Storm brakes Type VZFH-HVZ RÖMER Fördertechnik Your partner in brake + safety technology. Special characteristics: ▪ Especially suitable for fast moving crane systems ▪ Vertically lifting function ▪ No contact with the rail during crane travel ▪ - NO guide rollers / wheels, therefore NO WEAR Lateral positioning during lowering - patent pending system Especially suitable for transverse travels Up to 640 kN restraining force per clamp Fail-Safe-System ▪ Clamp carriage lifted ▪ Lateral displacement ▪ No contact with the rail ▪ Clamp carriage lowered as far as...

Rail Clamp Type VZFH-HVZ with lifting of the lever system RÖMER Fördertechnik GmbH Nielandstraße 53 * D-58300 Wetter L Hydraulik-Aggregat hydraulic unit Schutzhaube / Inspektionsdeckel guard hood / inspection cap Hydraulik-Zylinder hydraulic cylinder geöffnet opened Zangenwagen clamp carriage Dimensions acc. to the project: Type of rail _____________ Hebelsystem angehoben lever system lifted Rail head width Rail height Rail channel width Rail channel height If a rail channel is existing (or according crossing sections) Restraining Force and Dimensions Design./.Size Restraining force Weight...

Rail Clamp Type VZFH-HVZ with Guidance of the lever system Type VHS Page 2 of 2 RÖMER Fördertechnik GmbH Nielandstraße 53 * D-58300 Wetter Vertical and horizontal guidance Type VHS The track rollers (8) for the lateral centring of the rail clamp adjust the clamp system during lowering of the lever system before closing and thus compensate a rail displacement with vertical and horizontal movement capability if necessary. In doing so it is guided by the additional vertical–horizontal-guidance VHS within the crane housing that is mounted to the crane. For that matter it could move only...

Rail Clamp Type VZH Size 1) The separated hydraulic aggregate weights 55 kg. 2) For version „Fail-Safe-System“ (-S) total height will increase by 350 mm, if the system is assembled above the clamp. Generally the approved drawing acc. to the specific project is to be respected. Operating Principle The rail clamp system type VZH-A-S , as example, consists of three main units: - the rail clamp VZH - the hydro unit -A It’s an all-purpose clamp system to fix rail bound vehicles to the rail - for example cranes etc.. An unintentional movement of the vehicle due to wind will be...