Geared scroll chucks in steel design. APPLICATION Proven rotary chuck for use in areas requiring high clamping forces, high concentricity precision as well as reliable long-term repeatability. For universal use on lathes, rotary tables, dividing units, etc. TYPE Geared scroll chucks in steel design. CUSTOMER BENEFITS © High clamping force © Special flat design with direct mounting. © The jaws can be adjusted over the entire clamping range by turning the key. This allows workpieces with different clamping diameters to be quickly clamped © Jaws in chuck ground out for concentricity TECHNICAL FEATURES - With one-piece jaws or with base and top jaws - Steel body and spiral ring die-forged A09 4 jaw chuck with outside and inside jaws ISO 702-3 (DIN 55027), with studs and locknuts, optional DIN 55021 with set screw and nut Further sizes and mountings available on request

Geared scroll chucks in steel design. Short tapor mount DIN 55021, with setscrews and locknuts DIN 55027, with setscrews and locknuts All other dimensions should be taken from the table about chucks with cylindrical centre mount