Catalogs >
RÖHM GmbH >
Swivel units RSP

Swivel units RSP
8Pages

Catalog excerpts

SWIVELING UNIT RSP-FLEX Smooth and precise swiveling

SWIVELING UNIT RSP-FLEX Especially with automated loading and unloading of machine tools, the RSP-Flex swivel units offer an alternative to expensive special constructions. Due to the modular design and extensive expansion options they are flexible and securely integratable. A significant increase in productivity is achieved by RÖHM swivel units RSP-Flex. This modular system meets the requirements of customized solutions with a high degree of flexibility. This provides a great range of applications - from loading and unloading crankshafts in machining centers to rapid and precise insertion...

Open the catalog to page 2

FUNCTIONAL PRINCIPLE AND APPLICATIONS 5 1 2 6 1 Strong dimensioned ball bearing for high load capacity 2 Double driven pneumatic cylinders 3 Finely graduated end position adjustment without loss of accuracy 4 Flexible adjustable damper adjustment 5 Big hole for media feed-through 6 Wear free high precision damper with high impact load capability MODULAR DESIGN FROM A SINGLE SOURCE Due to integrated media feed-through for pneumatic and sensoric cables there are manifold possibilities for application specific set-ups. With a large range of grippers the swivel units RSP-Flex can be expanded...

Open the catalog to page 3

MODULAR CONSTRUCTION FOR MAXIMUM FLEXIBILITY RSP-Flex - basic unit* • With through-hole RSP-Flex - basic unit with fluid feed-through* • With fluid feed-through and through-hole -F4 4-fold fluid feedthrough (RSP32-Flex) • -F8 8-fold fluid feedthrough (RSP42-Flex / RSP52-Flex) • RSP-Flex - basic unit with fluid and cable feed-through* • With fluid feed-through, with cable feed-through -F4 + -KD8 8-fold cable feed-through (RSP32-Flex) • -F8 + -KD8 8-fold cable feed-through (RSP42-Flex / RSP52-Flex) • RSP-Flex - basic unit with fluid and cable feed-through and proximity switch adapter* • With...

Open the catalog to page 4

NEW TECHNOLOGIES RSP-END POSITION ADJUSTMENT Counter nut Safety washer Hard stop housing Stop piston for end position 1. step: disassemble safety cap and losen counter nut Stop piston for damper 2. step: adjust end position No loss of the end position because of strong safety lock Stepless adjustment of the end angle No loss of end position in case of damper adjustment 3. step: tighten counter nut and reassemble safety cap THE DAMPER MAKES THE DIFFERENCE Simple load adjustment Flexible and easy damper setting from the outside with use of a key. The replacement or disassembly the swivel unit...

Open the catalog to page 5

number of fluid feed-throughs RSP32=4; RSP42/RSP52=8 (max. 8 bar) ' number of signals=RSP32=8; RSP42/52=10 (24V, max. 1A), plug machine side M16, plug tool side M8 * number of holders for proximity switches:

Open the catalog to page 6