*mydirectindustry

Micro-machining of plastics

Product catalog summary

Overview: Röchling Industrial (UK) Limited, located in Hitchin, specializes in engineering excellence and material knowledge, particularly in the micro-machining of plastics.

Specifications:

Component diameters can be as small as 0.5mm.
Bore sizes are achievable down to 0.1mm.
Wall thickness can be reduced to 0.1mm, even for PTFE materials.
Tolerances are maintained as tight as 0.02mm.
Surface finishes can reach N4 (Ra 0.2 μm).
Component aspect ratios can be as high as 100:1.

Quality Management:

Advanced de-burring techniques are employed.
Ultrasonic cleaning capabilities are available.
Co-ordinate measurement machines are used for precision.
Non-contact inspection methods are utilized.
Multi-sensor probes ensure accuracy.
Measurement accuracy is up to 1 micron.

Certifications:

AS9100D
ISO9001:2015

Catalog excerpts

Micro-machining of plastics Engineering excellence and material knowledge • Component diameters down to 0.5mm • Bore sizes to 0.1mm • Wall thickness as low as 0.1mm even on PTFE • Tolerances as tight as 0.02mm • Surface finishes of N4 (Ra 0.2 μm) • Component aspect ratios of 100:1 Quality management • Advanced de-burring techniques • Ultrasonic cleaning capabilities • Co-ordinate measurement machines • Non-contact inspection • Multi-sensor probes • 1 micron accuracy Röchling Industrial (UK) Limited - Hitchin Wilbury Way | Hitchin | Hertfordshire | SG4 0TW | T +44 1462 450741 | [email protected] Röchling Industrial. Empowering Industry. w

Open the catalog to page 1

Micro-machining of plastics

Micro-machining of plastics

Catalog excerpts

All RÖCHLING ENGINEERING PLASTICS ITALIA catalogs and technical brochures