Technical Data FUELSEAL Foliac Super Red pipe sealant for metallic threaded and flanged joints Product Overview ROCOL FUELSEAL is a red compound giving efficient sealing for ferrous pipework. ROCOL FUELSEAL should not be applied in sub-zero temperatures. Ensure surfaces are clean and free of contaminants then apply with a ROCOL FUELSEAL is a setting pipe sealant for metallic threaded and flanged joints. Joints should be assembled within 30 minutes of applying ROCOL FUELSEAL. Pressure testing should only be carried out after the PJC has been allowed to dry for a minimum Typical Applications ROCOL FUELSEAL is primarily designed for the sealing of petrol, diesel, fuel oils, mineral oils, LPG, paraffin and white spirit. It is also suitable for air, of 24 hours at an ambient temperature of 20 C25°C. Drying time will be considerably lengthened if the ambient temperature is lower. the joint as this can drastically slow down the drying time. temperature range from -20 C to +250 C. Joints sealed with ROCOL FUELSEAL are easy to break and clean. ROCOL FUELSEAL has been pressure tested up to 40 bar (580 psi). Do not leave a fillet of sealant on the outside of Hemp or other substitute fillers can be used on poor fitting joints, however, the FUELSEAL must be applied to the male thread first, followed by the filler and then another coating of FUELSEAL ROCOL FUELSEAL sets hard but is flexible enough to resist vibration, thermal expansion and contraction of pipework. ROCOL FUELSEAL is compatible with foam forming leak testers such as ROCOL Leak Detector Spray. so that the filler is captive inside the FUELSEAL. Always store upright. The storage temperature should be controlled between +1°C and +40°C. Shelf life is 2 years from date of manufacture. Pack Sizes Pack Size 375g

Technical Data FUELSEAL Foliac Super Red pipe sealant for metallic threaded and flanged joints Test Method Dark red viscous liquid Base Type Organic resin & solvents Iron oxide Temperature Range Pressure Resistance *In-house testing *In-house testing – ½ BSPT malleable iron fittings cycled at 200°C, 400°C & 600°C with no leaks visible when pressure tested at each stage with nitrogen at 40bar. Values quoted above are typical and do not constitute a specification. Safety Data Sheets Safety data sheets are available for download from our website www.rocol.com or may be obtained from your usual ROCOL...