Technical Data FLAWFINDER CLEANER SPRAY NDT Crack Detection Spray FLAWFINDER Non-destructive inspection system is designed to provide a fast reliable method for visual detection of cracks or flaws which would not normally be visible to the naked eye. Ideal for the inspection of welded joints, castings, forgings etc... FLAWFINDER CLEANER is an aerosol applied solvent, which can be sprayed from any angle, for the easy removal of FLAWFINDER DYE PENETRANT and FLAWFINDER DEVELOPER Sprays. 1. Shake aerosol well before use. Rapid and effective cleaning agent. Non-chlorinated solvent. Multi-angle valve system. Leaves no residue. 2. Apply from a distance of 15-30cm. 3. As with all products of this type it is recommended that compatibility with painted or coated surfaces, plastics and rubber be tested prior to use. The information in this publication is based on our experience and reports from customers. There are many factors outside our control or knowledge which affect the use and performance of our products, for which reason it is given without responsibility.

Technical Data Application Method 1. Clean the area to be tested with FLAWFINDER CLEANER SPRAY (No.1) and wipe thoroughly with a tissue or a lint-free cloth to ensure the surface is clean, dry and free of contaminants. 2. When the surface is completely dry apply FLAWFINDER DYE PENETRANT SPRAY (No.2) to cover the test area and allow a minimum contact time of 10 mins. Finer definitions may require longer contact time. 3. Once the contact time has elapsed, the excess penetrant should be removed from the surface with a tissue or lint-free cloth wetted with FLAWFINDER CLEANER (No.1). N.B. Do not spray...